Internal Structure of Lithium Metal Electrodeposited in a Bis(fluorosulfonyl)amide-Based Ionic Liquid under External Pressure
Open Access
- 9 October 2026
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (19) , 190513
Abstract
The effect of uniaxial external pressure on the internal structure of deposited lithium was investigated in a bis(fluorosulfonyl)amide (FSA – )-based ionic liquid, 1-methoxyethyl-1-methylpyrrolidinium bis(fluorosulfonyl)amide, containing a high concentration of LiFSA. Cross-sectional observation revealed that dense and columnar Li deposits were obtained under external pressure exceeding 0.50 MPa. These columnar deposits exhibited a preferential (110) orientation which is the most densely packed plane in a body-centered cubic lattice. Consequently, a Li|LiFePO 4 coin cell demonstrated improved cycling durability under 0.50 MPa compared with 0.30 MPa during galvanostatic cycling at 0.50 mA cm –2 .Keywords
Funding Information
- Japan Science and Technology Agency (JPMJGX23S0)
This publication has 34 references indexed in Scilit:
- Stress‐Mediated Dynamic Li Plating in Practical Li Metal Pouch CellsAdvanced Functional Materials, 2025
- Compression promotes the formation of {110} textures during homoepitaxial deposition of lithiumEnergy Storage Materials, 2023
- Understanding Li creep in Li-metal pouch cells and the role of separator integrityJournal of Power Sources, 2023
- Unexpected capacity fade and recovery mechanism of LiFePO4/graphite cells for grid operationJournal of Power Sources, 2020
- Elastic, plastic, and creep mechanical properties of lithium metalJournal of Materials Science, 2018
- Lithium dendrite suppression and cycling efficiency of lithium anodeElectrochemistry Communications, 2018
- Highly Fluorinated Interphases Enable High-Voltage Li-Metal BatteriesChem, 2018
- Lithium metal stripping/plating mechanisms studies: A metallurgical approachElectrochemistry Communications, 2006
- Fast cycling of Li/LiCoO2 cell with low-viscosity ionic liquids based on bis(fluorosulfonyl)imide [FSI]−Journal of Power Sources, 2006
- Effects of physical constraints on Li cyclabilityJournal of Power Sources, 1991