The Karlsruhe Tritium Neutrino experiment (KATRIN) is an ambitious experiment to measure the electron neutrino mass from decay electrons of tritium with a sensitivity of 0.2 eV/c 2. The length of the setup will be about 70 m, comprising an ultra luminous gaseous tritium source, a transport section with differential pumping, an electrostatic tandem spectrometer and a detector. The spectrometer section consists of two UHV vessels: i) the pre‐spectrometer with a diameter of 1.7 m and a length of 3.4 m acts as a pre‐filter for the large number of electrons entering from the source, ii) the main spectrometer with a length of 23.3 m and a diameter of 10m provides the necessary energy resolution of 1 eV. The high sensitivity requires a very low background rate of about 10 mHz. Among others this rate depends on the pressure inside the spectrometers, which are designed to maintain UHV conditions of 10−11 mbar or below. First prototype measurements with the smaller pre‐spectrometer (volume: 8.5 m 3, surface: 25 m 2) have been conducted, providing data on outgassing of the stainless steel (316LN) walls in the range of 10−13 mbar l/s cm 2 and testing the pumping concept of the system. With a combination of turbo‐molecular pumps and SAES St707 NEG strips a pressure in the 10−11 mbar region has been reached. This paper reports on the results of these measurements.