Estimation of Rubber Waste Concrete Properties by Ultrasonic Velocities: Effect of Transducers’ Diameters and Frequencies
Authors:
Open Access
- 1 June 2020
- journal article
- research article
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 30 (2) , 200-220
Abstract
This experimental study aimed to use the ultrasonic pulse velocity method (UPV) in order to investigate the effect of rubber tire waste content and transducers’ diameters and frequencies on the evolution of ultrasonic velocities in time and to elucidate the correlations between UPV and the properties of various concrete mixtures. The incorporation of this waste involved volume substitution (0, 5, 10, 15 and 20%) of fine aggregates (sand) by rubber waste (RW) granulates. The dry unit weight, porosity, compressive and flexural strengths, and velocity of ultrasonic waves with different transducers - which presents the non-destructive technique - were evaluated. Rubberized concrete mixtures showed increases in porosity with lower dry unit weight compared to the control concrete. Compressive strength, flexural strength and ultrasonic velocity obtained by all transducers decreases with increasing RW content. These decreases are not influenced by the curing age of concretes. Decreases in the diameter and frequency of transducers caused reductions in ultrasonic velocity. These reductions are not influenced by the volume replacement of sand by RW. Correlations showed that ultrasonic velocity represents a reliable non-destructive technique for measuring the properties of rubberized concretes.Keywords
This publication has 21 references indexed in Scilit:
- Scrap-tyre-rubber replacement for aggregate and filler in concreteConstruction and Building Materials, 2009
- Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networksUltrasonics, 2009
- Mechanical properties of concrete containing a high volume of tire–rubber particlesWaste Management, 2008
- Evaluation of concrete made with crushed limestone aggregate based on ultrasonic pulse velocityConstruction and Building Materials, 2008
- Experimental investigation on dynamic properties of rubberized concreteConstruction and Building Materials, 2008
- Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water / cement ratio and water contentCement and Concrete Research, 2006
- Influence of scrap rubber addition to Portland I concrete composites: Destructive and non-destructive testingComposite Structures, 2005
- Experimental study of wave dispersion and attenuation in concreteUltrasonics, 2005
- Effect of concrete mixing parameters on propagation of ultrasonic wavesConstruction and Building Materials, 2005
- Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concreteCement and Concrete Research, 2004