Data Mining Techniques for the Prediction of Bohme Surface Abrasion Rates from Rock Properties
Author:
- 5 November 2019
- journal article
- conference paper
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 48 (1) , 323-332
Abstract
Abrasion refers to the wearing down of rock surfaces due to abrasive grains. Abrasion resistance refers to the ability of rocks to withstand wear. Abrasion resistance is used to determine the resistance of building materials produced for flooring, cladding, and pavements and to demonstrate suitability for higher movement areas. While it is, therefore, very necessary to determine the abrasion rate of building materials prior to construction, it is, however, highly demanding and time consuming to determine abrasion rates. Thus, the aim of this study is to use some rock properties to determine abrasion rates. The study samples, consisting of 32 different types of rocks (sedimentary, metamorphic, and igneous) collected from different regions in Turkey, were subjected to some physical and mechanical tests, namely the following: unit volume weight (UVW), apparent porosity (AP), modulus of elasticity (E), uniaxial compressive strength (UCS), tensile strength (TS), Shore hardness (SH), and point load strength (PL) and Bohme abrasion tests. To ascertain the abrasion rate from some physical and mechanical properties of rocks, the results of these tests were analyzed using data mining (DM) techniques. The results showed that there are high correlation coefficients between abrasion rate and the aforementioned rock properties with the support vector machines (SVM) and random forests (RF) models obtained as R = 0.882 and 0.881, respectively. This work has shown that the rock Bohme abrasion rate can be predicted from some of its physical and mechanical properties with significant level of confidence.Keywords
This publication has 19 references indexed in Scilit:
- Considerations on the European Standard EN 14157 Test Methods: Abrasion Resistance of Natural Stones Used for Flooring in BuildingsRock Mechanics and Rock Engineering, 2011
- Effect of freeze–thaw process on the abrasion loss value of stonesInternational Journal of Rock Mechanics and Mining Sciences, 2010
- Optimisation of an abrasion resistance test method on natural stonesBulletin of Engineering Geology and the Environment, 2010
- Abrasion resistance of carbonate rocks used in dimension stone industry and correlations between abrasion and rock propertiesInternational Journal of Rock Mechanics and Mining Sciences, 2008
- Deterioration of the volcanic kerb and pavement stones in a humid environment in the city centre of Izmir, TurkeyEnvironmental Geology, 2006
- Material properties of the Menderes Massif Marbles from SW TurkeyEngineering Geology, 2005
- Measuring abrasion resistance with a fixed abrasive loopWear, 2005
- Some engineering properties of natural building cut stones of CyprusConstruction and Building Materials, 2004
- Geostatistical evaluation of dimension-stone quarriesEngineering Geology, 2000
- Porosity and Wear Resistance in Stone Flooring TilesJournal of Testing and Evaluation, 2000