Delamination Prediction and Multi‐Objective Optimization in Ultrasonic Vibration‐Assisted Helical Milling ( UVHM ) of UHMWPE Composites
- 16 August 2026
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 47 (20) , 18823-18835
Abstract
Ultrasonic vibration‐assisted helical milling (UVHM) of ultra‐high molecular weight polyethylene (UHMWPE) fiber composites was experimentally investigated. Single‐factor experiments showed that UVHM reduced the delamination ratio by 2.6%–7.3% compared with conventional helical milling, and an energy accumulation framework based on intermittent cutting was proposed to elucidate the suppression mechanism. A Box–Behnken design ( n = 5000–7000 r/min, ng = 50–70 r/min, ap = 0.10–0.20 mm/r) was then employed to establish a second‐order RSM delamination model (R2 = 0.9888), with pitch identified as the dominant factor (F = 329.39). An RSM‐GRA nested strategy was developed, incorporating the RSM‐predicted delamination ratio with measured surface roughness, axial force, and material removal rate into gray relational analysis using an L16 orthogonal array ( n = 5000–8000 r/min). A Monte Carlo simulation ( N = 10,000) confirmed 98.2% ranking stability. A confirmation experiment at the recommended optimum ( n = 8000 r/min, ng = 50 r/min, ap = 0.10 mm/r) yielded a gray relational grade of 0.7816, exceeding the L16 best, and the measured delamination ratio closely matched the RSM prediction (error = 3.0%), validating the nested strategy.Keywords
Funding Information
- National Natural Science Foundation of China (51575470)
- National Natural Science Foundation of China (52575522)
This publication has 32 references indexed in Scilit:
- Ultrasonic vibration-assisted machining in aerospace composite materials: Principle, technology, challengesComposites Part A: Applied Science and Manufacturing, 2025
- Materials used in space shuttle: Evolution, challenges, and future prospects— An overviewComposites Part B: Engineering, 2025
- Removal mechanism and hole quality of SiCp/Al composites by ultrasonic elliptical vibration-assisted helical millingCeramics International, 2024
- Experimental study on ultrasonic vibration‐assisted drilling performance of carbon fiber polyetherketoneketone laminatePolymer Composites, 2024
- Impact response and energy absorption mechanisms of UHMWPE fabric and composites in ballistic applications: A comprehensive reviewComposites Part A: Applied Science and Manufacturing, 2024
- Progressive damage modeling in open hole composite laminates with ultrasound-informed drilling-induced delaminationComposites Part A: Applied Science and Manufacturing, 2024
- Optimization of AWJ parameters for improved material removal and hole geometry in drilling of Glass Fiber/Aluminum mesh epoxy hybrid compositesPolymer Composites, 2024
- Optimization of process variables in drilling of carbon fiber reinforced plastics using various multi criteria decision making approachesMaterialwissenschaft und Werkstofftechnik, 2023
- Multi-objective optimization of thermoplastic CF/PEKK drilling through a hybrid method: An approach towards sustainable manufacturingComposites Part A: Applied Science and Manufacturing, 2023
- A review of mechanical drilling for composite laminatesComposite Structures, 2012