A 2-D Micromachined SOI MEMS Mirror With Sidewall Electrodes for Biomedical Imaging
Authors:
- 12 July 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 15 (4) , 501-510
Abstract
This paper presents a 2 DOF silicon-on-insulator (SOI) microelectromechanical systems (MEMS) mirror with sidewall (SW) electrodes for biomedical imaging. The MEMS mirror is actuated by electrostatic actuators, and the mirror plate is 1000 μm × 1000 μm with a thickness of 35 μm. The paper analyzes the effects of the single-crystal serpentine torsion bar width and bottom electrodes and SW electrodes on the performance of the micromirror. A new fabrication process based on SOI wafer, hybrid bulk/surface micromachined technology, and a high aspect-ratio shadow mask is presented. In comparison to the previous fabrication process and the Optical iMEMS process, the process is novel, easily understood, and simple to realize. Static and dynamic experiments indicate that a MEMS mirror with SW can provide a large scanning angle under low-drive voltage. The MEMS mirror is developed for a confocal MACROscope system for biomedical imaging. This mirror is also well suited for applications where large linear angular scan at low-driving voltage is required.Keywords
This publication has 15 references indexed in Scilit:
- Design and fabrication of a MEMS mirror for miniature laser projection2009
- A Characteristic Study of Micromirror with Sidewall ElectrodesInternational Journal of Optomechatronics, 2007
- A high-resolution MACROscope with differential phase contrast, transmitted light, confocal fluorescence, and hyperspectral capabilities for large-area tissue imagingIEEE Journal of Selected Topics in Quantum Electronics, 2005
- Analysis, simulation and relative performances of two kinds of serpentine springsJournal of Micromechanics and Microengineering, 2005
- Optical IMEMS/sup /spl reg//-a fabrication process for MEMS optical switches with integrated on-chip electronics2004
- A design methodology for a bulk-micromachined two-dimensional electrostatic torsion micromirrorJournal of Microelectromechanical Systems, 2003
- Electrostatic micromachine scanning mirror for optical coherence tomographyOptics Letters, 2003
- Linearization of electrostatically actuated surface micromachined 2-D optical scannerJournal of Microelectromechanical Systems, 2001
- Silicon-micromachined scanning confocal optical microscopeJournal of Microelectromechanical Systems, 1998
- High-resolution shadow-mask patterning in deep holes and its application to an electrical wafer feed-throughSensors and Actuators A: Physical, 1996