Decreasing paint cost for sheet molding compound ( SMC ) compression molding
- 3 November 2020
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 61 (1) , 211-220
Abstract
Finishing, in most cases, is the most expensive step for manufacturing plastic parts in automotive and truck industry; being electrostatic painting is the desired approach for improved quality. For plastic parts to be painted electrostatically, a conductive primer needs to be applied first. In the case of SMC compression molded parts, in‐mold coating (IMC) is the primer material of choice, as it also serves to fill the surface porosity typical in SMC parts. To make the IMC conductive, the current approach is to add carbon black (CB), which results in a black colored primer. In this research, single wall carbon nanotube (SWCNT) was evaluated, as an alternative to CB, to develop a clearer version of conductive IMC. The effect of SWCNTs on both degree of lightness and electrical conductivity was experimentally evaluated. The results indicate that a clearer and slightly more conductive coating than standard IMC can be obtained by adding 0.15 wt% SWCNTs into the base IMC resin, which results in approximately 12.5% paint saving compared to standard IMC. The processability of the modified coating was shown to be only slightly less favorable than standard coating.Keywords
This publication has 21 references indexed in Scilit:
- Multi-functional CNT nanopaper polyurethane nanocomposite fabricated by ultrasonic infiltration and dip soaking processesComposites Part B: Engineering, 2020
- Performance study of ultrasonic assisted processing of CNT nanopaper/solventless epoxy compositeComposites Part B: Engineering, 2019
- Ultrasonic processing of MWCNT nanopaper reinforced polymeric nanocompositesPolymer, 2018
- Modeling and characterization of carbon nanotube agglomeration effect on electrical conductivity of carbon nanotube polymer compositesJournal of Applied Physics, 2014
- On the importance of the structure in the electrical conductivity of fishbone carbon nanofibersJournal of Materials Science, 2012
- Polymer nanocomposites based on functionalized carbon nanotubesProgress in Polymer Science, 2010
- Polymer NanocompositesMRS Bulletin, 2007
- Electrical conductivity of carbon blacks under compressionCarbon, 2005
- Coatings Of Polymers And Plastics2003
- Electrical conductivity of thermal carbon blacksCarbon, 2001