Lattice Numerical Simulations of Hydraulic Fracture Propagation and Their Geometry Evolution in Transversely Isotropic Formations
Open Access
- 24 November 2021
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 9
Abstract
Accurate prediction of the fracture geometry before the operation of a hydraulic fracture (HF) job is important for the treatment design. Simplified planar fracture models, which may be applicable to predict the fracture geometry in homogeneous and continuous formations, fail in case of fractured reservoirs and laminated formations such as shales. To gain a better understanding of the fracture propagation mechanism in laminated formations and their vertical geometry to be specific, a series of numerical models were run using XSite, a lattice-based simulator. The results were studied to understand the impact of the mechanical properties of caprock and injection parameters on HF propagation. The tensile and shear stimulated areas were used to determine the ability of HF to propagate vertically and horizontally. The results indicated that larger caprock Young’s modulus increases the stimulated area (SA) in both vertical and horizontal directions, whereas it reduces the fracture aperture. Also, larger vertical stress anisotropy and tensile strength of caprock and natural interfaces inhibit the horizontal fracture propagation with an inconsiderable effect in vertical propagation, which collectively reduces the total SA. It was also observed that an increased fluid injection rate suppresses vertical fracture propagation with an insignificant effect on horizontal propagation. The dimensionless parameters defined in this study were used to characterize the transition of HF propagation behavior between horizontal and vertical HFs.Keywords
This publication has 35 references indexed in Scilit:
- A simplified three-dimensional displacement discontinuity method for multiple fracture simulationsInternational Journal of Fracture, 2015
- Initiation of a secondary crack across a frictional interfaceEngineering Fracture Mechanics, 2015
- Test Design and Sample Preparation Procedure for Experimental Investigation of Hydraulic Fracturing Interaction ModesRock Mechanics and Rock Engineering, 2014
- Three-Dimensional Numerical Model of Hydraulic Fracturing in Fractured Rock Masses2013
- Fluid‐driven multiple fracture growth from a permeable bedding plane intersected by an ascending hydraulic fractureJournal of Geophysical Research, 2012
- Effect of Formation Modulus Contrast on Hydraulic Fracture Height ContainmentSPE Production & Operations, 2008
- Hydraulic Fracture Propagation in Layered Rock: Experimental Studies of Fracture ContainmentSociety of Petroleum Engineers Journal, 1984
- In-Situ Stresses: The Predominant Influence on Hydraulic Fracture ContainmentJournal of Petroleum Technology, 1982
- Containment of Massive Hydraulic FracturesSociety of Petroleum Engineers Journal, 1978
- Hydraulic Fracture Propagation in Layered FormationsSociety of Petroleum Engineers Journal, 1978