Thermomechanical properties of 1C molding compounds
Authors:
- 1 May 1990
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 30 (10) , 609-617
Abstract
Eight commercial semiconductor grade epoxy compounds that are used to encapsulate 1C (integrated circuit) devices have been evaluated for their ability to minimize the development of thermal stresses which can cause failure during device temperature cycling. Thermal expansion, dynamic modulus and adhesion studies are used to describe the mechanical interaction between the plastic package and the silicon device it surrounds. A “figure of merit” is defined for the development of stress on the 1C device as it is cooled after the packaging process. The stress is shown to be proportional to the product of three terms: (αp‐αs) Ep (Tanch‐T) where αp and αs are the expansion coefficients for the plastic and silicon, respectively, Ep is the modulus of the epoxy and Tanch is the temperature at which the epoxy becomes anchored to the silicon device during transfer molding. In addition, the importance of good adhesion between the epoxy encapsulant and the silicon device to prevent package cracking has been demonstrated by finite element analysis and a novel adhesion test.Keywords
This publication has 8 references indexed in Scilit:
- DSC and13C‐NMR studies of the imidazole‐accelerated reaction between epoxides and phenolsJournal of Applied Polymer Science, 1989
- A model for the curing reaction of epoxy resinsMacromolecules, 1989
- New Profile of Ultra Low Stress Resin Encapsulants for Large Chip Semiconductor DevicesIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1987
- Internal stress of epoxy resin modified with acrylic core-shell particles containing functional groups prepared by seeded emulsion polymerizationJournal of Applied Polymer Science, 1987
- Internal stress of epoxy resin modified with acrylic core‐shell particles prepared by seeded emulsion polymerizationJournal of Applied Polymer Science, 1986
- Hypersonic attenuation in poly(dimethylsiloxane) as a function of temperature and pressureMacromolecules, 1984
- Experimental and Mathematical Determination of Mechanical Strains within Plastic IC Packages and Their Effect on Devices During Environmental Tests8th Reliability Physics Symposium, 1981
- A New Derivation of Post Gel Properties of Network PolymersMacromolecules, 1976