In situ x-ray observation of keyhole dynamics for laser beam welding of stainless steel with 16 kW disk laser
Authors:
- 1 November 2021
- journal article
- research article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 33 (4) , 042043
Abstract
Focused laser is one of the highest power density sources available to industries such as automotive industry, heavy industry, and nuclear power plant industry because thermal influence is narrow and it is excellent in local workability. However, laser welding causes defects of cracks and pores. In particular, the formation of keyholes, which are factors for forming these welding defects, and the mechanism of spatter generation have not been sufficiently investigated. In this study, an x-ray phase contrast imaging technique was employed to investigate the keyhole welding with laser in order to clarify the spatter generation mechanism and keyhole formation mechanism in vacuum. Furthermore, the amount of spatter generated by vacuum laser welding was quantitatively analyzed, and the factors that suppress the spatter under vacuum were clarified. As a result, it was found that the penetration depth was dependent on the keyhole aperture.Keywords
This publication has 12 references indexed in Scilit:
- Preheat effect on titanium plate fabricated by sputter-free selective laser melting in vacuumApplied Physics A, 2018
- Formation mechanisms of pores and spatters during laser deep penetration weldingJournal of Laser Applications, 2017
- Investigation of the microstructure and surface morphology of a Ti6Al4V plate fabricated by vacuum selective laser meltingApplied Physics A, 2016
- Surface morphology of Ti–6Al–4V plate fabricated by vacuum selective laser meltingApplied Physics B, 2015
- Full Penetration Welding of Thick High Tensile Strength Steel Plate with High Power Disk Laser in Low VacuumQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2015
- Spatter in laser weldingJournal of Laser Applications, 2011
- Experimental study of the dynamical coupling between the induced vapour plume and the melt pool for Nd–Yag CW laser weldingJournal of Physics D: Applied Physics, 2006
- Effect of vacuum on penetration and defects in laser weldingJournal of Laser Applications, 2001
- Dynamics of keyhole and molten pool in laser weldingJournal of Laser Applications, 1998
- Fundamental phenomena during vacuum laser welding1984