Nanocrystallized Surface Effect on the Tribocorrosion Behavior of AISI 420
Open Access
- 12 November 2022
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 10 (11) , 304
Abstract
Nanopeening treatment was applied to the AISI 420 steel to decrease its sensitivity to tribocorrosion damage. The microstructural investigation highlighted that the nanopeening treatment led to high plastic deformation and a nanostructured surface layer with a 110 µm depth. In order to study the combined effect of corrosion and mechanical wear, tribocorrosion tests were performed on non-treated and nanopeened samples in boric acid and lithium hydroxide solutions, considering both continuous and intermittent sliding. It was found that the AISI 420 steel is sensitive to the synergy between mechanical friction and electrochemical corrosion with the dominance of abrasive wear. Adhesive wear was also detected in the wear track. Indeed, the mechanical wear was pronounced under intermittent sliding because of hard wear debris generation from the repassivated layer during rotating time. The nanopeening treatment led to enhanced mechanical performance and corrosion properties. Such improvement could be explained by the high plastic deformation resulting in the nano-structuration of grains and the increasing hardness of AISI 420 steel.Keywords
All Related Versions
This publication has 44 references indexed in Scilit:
- Assessments on friction and wear behaviors of P110 steel and chromizing coating sliding against two counterparts under dry and wet conditionsApplied Surface Science, 2012
- Effect of surface nanocrystallization induced by fast multiple rotation rolling on hardness and corrosion behavior of 316L stainless steelApplied Surface Science, 2011
- Materials challenges for nuclear systemsMaterials Today, 2010
- Localized Corrosion Susceptibility of Supermartensitic Stainless Steel in Welded JointsCorrosion, 2008
- The corrosion and corrosion–wear behaviour of plasma nitrided 17-4PH precipitation hardening stainless steelSurface and Coatings Technology, 2007
- Effects of alloying elements, Cr, Mo and N on repassivation characteristics of stainless steels using the abrading electrode techniqueMaterials Chemistry and Physics, 2006
- Tribocorrosion of stellite 6 in sulphuric acid medium: electrochemical behaviour and wearWear, 2004
- Influence of molybdenum on passivation of polarised stainless steels in a chloride environmentCorrosion Science, 2002
- Microstructural effects on the sliding wear resistance of a cobalt-based alloyWear, 1994
- The microstructure and galling wear of a laser-melted cobalt-base hardfacing alloyWear, 1990