A New Computational Method for Predicting Ductile Failure of 304L Stainless Steel
Open Access
Abstract
Austenitic stainless steel is useful for storing and transporting liquefied natural gas (LNG) at temperatures below −163 °C due to its superior low-temperature applications. This study develops a computational method for the failure prediction of 304L stainless steel sheet to utilize its usability as a design code for industrial purposes. To consider material degradation in a phenomenological way during the numerical calculation, the combined Swift–Voce equation was adopted to describe the nonlinear constitutive behavior beyond ultimate tensile strength. Due to the stress state-dependent fracture characteristics of ductile metal, a modified Mohr–Coulomb fracture criterion was adopted using stress triaxiality and Lode angle parameter. The numerical formulation of the elastoplastic-damage coupled constitutive model with fracture locus was implemented in the ABAQUS user-defined subroutine UMAT. To identify the material and damage parameters of constitutive models, a series of material tests were conducted considering various stress states. It has been verified that the numerical simulation results obtained by the proposed failure prediction methodology show good agreement with the experimental results for plastic behavior and fractured configuration.Keywords
Funding Information
- Materials/Parts Technology Development Program (20017575)
- R&D Platform Establishment of Eco-Friendly Hydrogen Propulsion Ship Program (20006644)
- Development and demonstration of the on-board marine debris disposal modules program of the Korea Institute of Marine Science & Technology Promotion (KIMST) (KIMST-20220494)
This publication has 53 references indexed in Scilit:
- Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part II: Ductile fractureInternational Journal of Plasticity, 2012
- On the predictive capabilities of the shear modified Gurson and the modified Mohr–Coulomb fracture models over a wide range of stress triaxialities and Lode anglesJournal of the Mechanics and Physics of Solids, 2011
- Calibration procedures for a computational model of ductile fractureEngineering Fracture Mechanics, 2010
- A new model of metal plasticity and fracture with pressure and Lode dependenceInternational Journal of Plasticity, 2008
- On fracture locus in the equivalent strain and stress triaxiality spaceInternational Journal of Mechanical Sciences, 2004
- Modelling of the damage in ductile steelsComputational Materials Science, 1996
- Failure criteria for isotropic bodies revisitedEngineering Fracture Mechanics, 1995
- A Continuous Damage Mechanics Model for Ductile FractureJournal of Engineering Materials and Technology, 1985
- On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-statesJournal of the Mechanics and Physics of Solids, 1976
- Plastic instability under plane stressJournal of the Mechanics and Physics of Solids, 1952