Enhancing the Weld Quality of Polylactic Acid Biomedical Materials Using Rotary Friction Welding
Open Access
Abstract
Polylactic acid (PLA) stands out as a biomaterial with immense potential, primarily owing to its innate biodegradability. Conventional methods for manufacturing PLA encompass injection molding or additive manufacturing (AM). Yet, the fabrication of sizable medical devices often necessitates fragmenting them into multiple components for printing, subsequently requiring reassembly to accommodate the constraints posed by the dimensions of the AM platform. Typically, laboratories resort to employing nuts and bolts for the assembly of printed components into expansive medical devices. Nonetheless, this conventional approach of jointing is susceptible to the inherent risk of bolts and nuts loosening or dislodging amid the reciprocating movements inherent to sizable medical apparatus. Hence, investigation into the joining techniques for integrating printed components into expansive medical devices has emerged as a critical focal point within the realm of research. The main objective is to enhance the joint strength of PLA polymer rods using rotary friction welding (RFW). The mean bending strength of welded components, fabricated under seven distinct rotational speeds, surpasses that of the underlying PLA substrate material. The average bending strength improvement rate of welding parts fabricated by RFW with three-stage transformation to 4000 rpm is about 41.94% compared with the average bending strength of PLA base material. The average surface hardness of the weld interface is about 1.25 to 3.80% higher than the average surface hardness of the PLA base material. The average surface hardness of the weld interface performed by RFW with variable rotational speed is higher than the average surface hardness of the weld interface performed at a fixed rotating friction speed. The temperature rise rate and maximum temperature recorded during RFW in the X-axis of the CNC turning machine at the outer edge of the welding part surpassed those observed in the internal temperature of the welding part. Remarkably, the proposed method in this study complies with the Sustainable Development Goals due to its high energy efficiency and low environmental pollution.Keywords
Funding Information
- Ministry of Science and Technology of Taiwan (NSTC 111-2221-E-131-015-MY2, MOST 110-2221-E-131-023, MOST 109-2637-E-131-004)
This publication has 47 references indexed in Scilit:
- The Effects of Pin Profile on HDPE Thermomechanical Phenomena during FSWPolymers, 2022
- Gradient Structure of the Transfer Layer in Friction Stir Welding JointsMaterials, 2022
- Friction Stir Welding Optimization of 3D-Printed Acrylonitrile Butadiene Styrene in Hybrid Additive ManufacturingPolymers, 2022
- Numerical Study of Contact Behavior and Temperature Characterization in Ultrasonic Welding of CF/PA66Polymers, 2022
- Effect of V Content and Heat Input on HAZ Softening of Deep-Sea Pipeline SteelMaterials, 2022
- Effect of Different Ultrasonic Power on the Properties of RHA Steel Welded JointsMaterials, 2022
- A Review of Structural Adhesive Joints in Hybrid Joining ProcessesPolymers, 2021
- Influence of Post Weld Heat Treatment on the Grain Size, and Mechanical Properties of the Alloy-800H Rotary Friction Weld JointsMaterials, 2021
- Effect of Friction Stir Welding Techniques and Parameters on Polymers Joint Efficiency—A Critical ReviewPolymers, 2021
- A Comprehensive Review on Optimal Welding Conditions for Friction Stir Welding of Thermoplastic Polymers and Their CompositesPolymers, 2021