The impact of film deposition and annealing on the nanostructure and dielectric constant of organic semiconductor thin films
- 29 August 2023
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (35) , 23867-23878
Abstract
The strategy of using a bulk-heterojunction light-absorbing layer has led to the most efficient organic solar cells. However, optimising the blend morphology to maximise light absorption, charge generation and extraction can be challenging. Homojunction devices containing a single component have the potential to overcome the challenges associated with bulk heterojunction films. A strategy towards this goal is to increase the dielectric constant of the organic semiconductor to ≈10, which in principle would lead to free charge carrier generation upon photoexcitation. However, the factors that affect the thin film dielectric constants are still not well understood. In this work we report an organic semiconductor material that can be solution processed or vacuum evaporated to form good quality thin films to explore the effect of chromophore structure and film morphology on the dielectric constant and other optoelectronic properties. 2,2′-[(4,4,4′,4′-Tetrakis{2-[2-methoxyethoxy]ethyl}-4H,4′H-{2,2′-bi[cyclo-penta[2,1-b:3,4-b′]dithiophene]}-6,6′-diyl)bis(methaneylylidene)]dimalononitrile [D(CPDT-DCV)] was designed to have high electron-affinity end groups and low ionisation-potential central moieties. It can be processed from solution or be thermally evaporated, with the film morphology changing from face-on to a herringbone arrangement upon solvent or thermal annealing. The glycol solubilising groups led to the static dielectric constant (taken from capacitance measurements) of the films to be between 6 and 7 (independent of processing conditions), while the optical frequency dielectric constant depended on the processing conditions. The less ordered solution processed film was found to have the lowest optical frequency dielectric constant of 3.6 at 2.0 × 1014 Hz, which did not change upon annealing. In contrast, the more ordered evaporated film had an optical frequency dielectric constant 20% higher at 4.2 and thermal annealing further increased it to 4.5, which is amongst the highest reported for an organic semiconductor at that frequency. Finally, the more ordered evaporated films had more balanced charge transport, which did not change upon annealing.Keywords
Funding Information
- Australian Research Council (LE170100144)
This publication has 29 references indexed in Scilit:
- Replacing Alkyl with Oligo(ethylene glycol) as Side Chains of Conjugated Polymers for Close π–π StackingMacromolecules, 2015
- Dielectric function of a poly(benzimidazobenzophenanthroline) ladder polymerPhysical Review B, 2015
- High‐Dielectric Constant Side‐Chain Polymers Show Reduced Non‐Geminate Recombination in Heterojunction Solar CellsAdvanced Energy Materials, 2014
- Balanced Carrier Mobilities: Not a Necessary Condition for High‐Efficiency Thin Organic Solar Cells as Determined by MIS‐CELIVAdvanced Energy Materials, 2013
- Critical Role of Alkyl Chain Branching of Organic Semiconductors in Enabling Solution-Processed N-Channel Organic Thin-Film Transistors with Mobility of up to 3.50 cm2 V–1 s–1Journal of the American Chemical Society, 2013
- Fluorine substituted thiophene–quinoxalinecopolymer to reduce the HOMO level and increase the dielectric constant for high open-circuit voltage organic solar cellsJournal of Materials Chemistry C, 2012
- Pathways to a New Efficiency Regime for Organic Solar CellsAdvanced Energy Materials, 2012
- Co-refinement of multiple-contrast neutron/X-ray reflectivity data usingMOTOFITJournal of Applied Crystallography, 2006
- 2.5% efficient organic plastic solar cellsApplied Physics Letters, 2001
- Self-Consistent Molecular-Orbital Methods. IX. An Extended Gaussian-Type Basis for Molecular-Orbital Studies of Organic MoleculesThe Journal of Chemical Physics, 1971