Abstract
Electrically conductive cementitious composites offer opportunities for developing multifunctional construction materials. However, achieving improved electrical conductivity while maintaining adequate mechanical performance remains challenging. In this work, Portland Slag Cement (PSC) and Pozzolana Portland Cement (PPC) mortars were modified with 0–2.5 wt.% expandable graphite (EG), followed by the incorporation of 0.2 wt.% carbon fiber (CF) and 0.5 wt.% superplasticizer (SP) to develop hybrid conductive composites. The structural, microstructural, mechanical, and electrical properties were investigated using X-ray diffraction, Fourier-transform infrared spectroscopy, field-emission scanning electron microscopy, compressive-strength measurements, and electrical-resistivity measurements. The hybrid PSC-based composites exhibited 28-day compressive strengths of 32.21–36.01 MPa, whereas the corresponding PPC-based composites exhibited strengths of 40.08–44.79 MPa. The incorporation of the hybrid EG+CF substantially reduced the electrical resistivity compared to EG alone, (∼3-4 orders of magnitude at 25◦) and ∼77% fractional change in resistance is observed over a temperature range from 25◦C to 150◦C). Temperature-dependent measurements revealed a pronounced influence of thermal conditioning on electrical transport, while load-dependent measurements demonstrated changes in the electrical response under applied mechanical loading. The findings highlight the importance ofbinder composition, conductive-filler loading, and specimen conditioning in determining the mechanical and electrical performance of hybrid carbonaceous-filler-modified cementitious composites.