Indentation-induced crack interaction in alumina ceramics
- 1 November 1996
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine A
- Vol. 74 (5) , 1245-1252
Abstract
Polycrystalline aluminas of tailored composition and grain size, prepared using liquid-phase sintering aids based on the A12O3[sbnd]CaO[sbnd]SiO2 and Al2O3[sbnd]MgO[sbnd]SiO2 systems, have been indented at loads close to their critical fracture limit P∗, using closely spaced arrays of low-load Vickers indentations. The propagation of cracks caused by indentation is influenced by internal residual stresses at alumina grain boundaries developed during cooling from the processing temperature, and primarily the result of thermal expansion mismatches between the α-Al2O3 crystals of the matrix and an intergranular glass of composition related to that of the sintering aid. The Al2O3[sbnd]MgO[sbnd]SiO2 system gives a glass of significantly lower expansivity than α-Al2O3 hoop tensile stresses are generated at the alumina–alumina boundaries which assist microcrack propagation and the intexlinking of lateral cracks from the closely spaced indentations. The converse is the case for the A12O3[sbnd]CaO[sbnd]SiO2 system, giving a glass of slightly higher expansivity than alumina, and which generates compressive stresses suppressing crack interlinking. Indentation arrays provide a useful technique for modelling the processes occurring during erosive wear caused by hard particle impact.Keywords
This publication has 21 references indexed in Scilit:
- Effects of silicon carbide nano-phase on the wet erosive wear of polycrystalline aluminaJournal of the European Ceramic Society, 1996
- Grain-size dependence of the wear of aluminaWear, 1995
- Indentation fracture1993
- The transition from mild to severe wear in alumina during slidingActa Metallurgica et Materialia, 1992
- The affect of surface finish on the sliding wear of aluminaJournal of Materials Science, 1990
- Grain‐Size and R ‐Curve Effects in the Abrasive Wear of AluminaJournal of the American Ceramic Society, 1989
- A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack MeasurementsJournal of the American Ceramic Society, 1981
- Quasi-static solid particle damage in brittle solids—I. Observations analysis and implicationsActa Metallurgica, 1976
- The strength of two-phase ceramic/glass materialsJournal of Materials Science, 1968
- RELATIONSHIP BETWEEN CHEMICAL COMPOSITION AND THE THERMAL EXPANSION OF GLASSES1Journal of the American Ceramic Society, 1927