Effect of Glycerol and Reactive Compatibilizers on Poly(butylene succinate)/Starch Blends
Authors:
- Supakij SuttiruengwongSSSupakij Suttiruengwong
- Kanchana SothoKSKanchana Sotho
- Manus SeadanMSManus Seadan
- 1 March 2014
- journal article
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 2 (1) , 85-92
Abstract
A one-step process in an internal mixer was used to prepare Poly(butylene succinate) (PBS)/high-loading modified tapioca starch (30-40 wt%) blends with low glycerol content (10-20 wt% of starch) as a plasticizer. To promote a good compatibility, two reactive agents, maleic anhydride (MA)/peroxide and methylene diphenyl diisocyanate (MDI), were selected and compared. The mechanical properties, morphology, and Molau test of the blends were investigated. The compatibility of PBS/starch blends was improved by both reactive agents at the suitable plasticizer loading (glycerol 10 wt% of starch). It was demonstrated that increasing mechanical properties resulted in good adhesion of PBS/starch interface and small evenly dispersed starch particles. MA/peroxide of 0.20/0.01 phr/phr and MDI of 0.2 phr were sufficient to improve the mechanical properties of PBS/starch (60:40 and 70:30) blends at 10 wt% glycerol (of starch). The results from the Molau test confirmed the formation of graft-copolymer at the interface when compatibilizers were added.Keywords
This publication has 14 references indexed in Scilit:
- Processing and Thermal Behaviors of Poly (Butylene Succinate) Blends with Highly-Filled Starch and GlycerolJournal of Polymers and the Environment, 2012
- Characteristics of biodegradable polylactide/gelatinized starch films: Effects of starch, plasticizer, and compatibilizerJournal of Applied Polymer Science, 2012
- Biodegradability and biodegradation rate of poly(caprolactone)-starch blend and poly(butylene succinate) biodegradable polymer under aerobic and anaerobic environmentWaste Management, 2011
- In situ compatibilization of maleated thermoplastic starch/polyester melt‐blends by reactive extrusionPolymer Engineering & Science, 2008
- Morphology and properties of compatibilized polylactide/thermoplastic starch blendsPolymer, 2007
- Compatibilization of starch–polyester blends using reactive extrusionPolymer Engineering & Science, 2006
- Preparation and properties of biodegradable poly(butylene succinate)/starch blendsJournal of Applied Polymer Science, 2005
- Physical properties and biodegradability of maleated-polycaprolactone/starch compositePolymer Degradation and Stability, 2003
- Mechanical properties and enzymic degradation of thermoplastic and granular sago starch filled poly(ε-caprolactone)European Polymer Journal, 2002
- Processability and properties of aliphatic polyesters, ‘BIONOLLE’, synthesized by polycondensation reactionPolymer Degradation and Stability, 1998