Characterization of shear stress at the tool‐part interface during autoclave processing of prepreg composites
- 3 January 2013
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 129 (4) , 2017-2028
Abstract
In this article, shear stress between an aluminum tool and a carbon fiber‐epoxy prepreg is characterized during cure using polymeric release agent and release film at the tool‐part interface. The effects of surface roughness, release materials, pull‐out speed, temperature, and normal force (autoclave pressure) on the shear stress are investigated using a customized friction rig. Results show that the interfacial shear stress decreases as the temperature increases and it increases as the normal force increases when using either the release film or the release agent. Additionally, changes in surface roughness from 1.35 to 0.18 μm decrease the shear stress 10–27% while the use of release agent shows a decrease between 23% and 51% in the shear stress. Furthermore, strong adhesion between the tool and the part is observed when using release agent and pull‐out speeds of 0.05 mm/min (static/dynamic friction ratio of 5.29 ± 0.19). Using the experimental data, a mathematical approach based on the Coulomb's friction model is proposed to predict the friction force at the tool‐part interface. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013Keywords
This publication has 18 references indexed in Scilit:
- Experimental study of tool–part interaction during autoclave processing of thermoset polymer composite structuresComposites Part A: Applied Science and Manufacturing, 2010
- An experimental method to study the frictional processes during composites manufacturingComposites Part A: Applied Science and Manufacturing, 2005
- The properties of poly(tetrafluoroethylene) (PTFE) in tensionPolymer, 2005
- Tool–part interaction in composites processing. Part I: experimental investigation and analytical modelComposites Part A: Applied Science and Manufacturing, 2004
- An experimental method for quantifying tool–part shear interaction during composites processingComposites Science and Technology, 2003
- Process induced stress for woven fabric thick section composite structuresComposite Structures, 2000
- Frictional resistance of thermoset prepregs and its influence on honeycomb composite processingComposites Part A: Applied Science and Manufacturing, 1996
- Friction and wear of PTFE — a reviewWear, 1992
- Process Modeling of Composite Materials: Residual Stress Development during Cure. Part II. Experimental ValidationJournal of Composite Materials, 1992
- Coefficient of friction of ptfe-impregnated porous bronze versus temperatureWear, 1978