Effect of Roughness on Shear Characteristics of the Interface between Silty Clay and Concrete
Open Access
- 1 January 2020
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Abstract
In order to study the effect of roughness on the mechanical parameters of silty clay‐concrete interface, and to explore the applicability of silicon piezoresistive sensor to test the interface pressure, a large‐scale direct shear test system was used to carry out experimental research on the shear characteristics of silty clay‐concrete interface under different roughness conditions. Based on silicon piezoresistive sensor, the shear characteristics of silty clay‐concrete interface are analyzed. The results show that the silicon piezoresistive sensor has excellent performance in measuring the interface pressure and can accurately obtain the shear characteristics of the silty clay‐concrete interface. The roughness has a significant influence on the shear strength, shear stiffness, and other mechanical properties of the prefabricated pile‐soil interface. With the increase of roughness, interface shear strength, interface friction angle, shear stiffness coefficient, and interface residual shear stress all show an increasing trend, with the maximum increase of 37.0%. The interface adhesion decreased first and then increased with the increase of roughness, with an increase of 23.7%. The test results can provide reference for the engineering practice of jacked pile.Keywords
Funding Information
- National Natural Science Foundation of China (51708316, 51778312)
- China Postdoctoral Science Foundation (2018M632641)
This publication has 14 references indexed in Scilit:
- Corrigendum: Field study of residual forces developed in pre-stressed high-strength concrete (PHC) pipe pilesCanadian Geotechnical Journal, 2017
- The effect of micro pore on the characteristics of crack tip plastic zone in concreteComputers & concrete, 2016
- Axial compressive response of large-capacity helical and driven steel piles in cohesive soilCanadian Geotechnical Journal, 2015
- Numerical determination of elastic compliance tensor of fractured rock masses by finite element modelingInternational Journal of Rock Mechanics and Mining Sciences, 2014
- Shaft Resistance and Setup Factors for Piles Jacked in ClayJournal of Geotechnical and Geoenvironmental Engineering, 2014
- Behavior of a Pressure-Grouted Soil-Cement Interface in Direct Shear TestsInternational Journal of Geomechanics, 2014
- Interface Roughness Parameters and Shear StrengthModern Applied Science, 2013
- Effects of Shear Rate on Cyclic Loading Shear Behaviour of Rock Joints Under Constant Normal Stiffness ConditionsRock Mechanics and Rock Engineering, 2013
- Effect of surface roughness of hydroxyapatite—coated titanium on the bone-implant interface shear strengthBiomaterials, 1994
- Shear Strength Characteristics of Sand‐Polymer InterfacesJournal of Geotechnical Engineering, 1990