Suppression of Magnetic Noise and Field in Cubic Low-Noise Ferrite Magnetic Shields
- 8 April 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Abstract
Most magnetic shielding rooms (MSRs) are made of highly permeable permalloy. The limitation of such MSR is its intrinsic magnetic noise, which exceeds the sensitivity of magnetic sensors, impeding the further applications of ultrasensitive magnetic sensors, such as the magnetometers operated in the spin-exchange relaxation free (SERF) regime. In this article, a cubic ferrite magnetic shield with a low magnetic noise and magnetic field is proposed. The demagnetization model and magnetic noise calculation models are given. After optimizing several different coil structures and degaussing parameters, the magnetic field and the magnetic noises inside the cubic ferrite shield were measured. Within a distance of ±10 mm near the center, the residual magnetic field is below 0.5, 1.72, and 1.57 nT at the x-, y- and z- directions. The magnetic noise measurements at the center of the cubic ferrite magnetic shield reveal an averaged magnetic noise of 2.62 fT/Hz−1/2 from 20 to 100 Hz. Compared with the noise spectrum of permalloy shield, the noise level is reduced more than 133%. The results of this scaled-down cubic ferrite magnetic shield can be applied in larger sized shielding rooms. By assembling multiple ferrite panels together, it is possible to create a larger shielding space with a low magnetic field and low magnetic noise.Keywords
Funding Information
- Young Scientists Fund of the National Natural Science Foundation of China (62203028)
- National Natural Science Foundation of China (42388101)
- Innovation Program for Quantum Science and Technology (2021ZD0300501)
This publication has 35 references indexed in Scilit:
- Design of gradient coils based on the target field method in a high-permeability shield considering sidewall aperturesResults in Physics, 2023
- Correlating the microstructure of Mn–Zn ferrite with magnetic noise for magnetic shield applicationsCeramics International, 2022
- A novel low-noise Mu-metal magnetic shield with winding shapeSensors and Actuators A: Physical, 2022
- A lightweight magnetically shielded room with active shieldingScientific Reports, 2022
- A review on recent advancement of electromagnetic interference shielding novel metallic materials and processesComposites Part B: Engineering, 2019
- Compromise between magnetic shielding and mechanical strength of thin Al/Steel/Al sandwiches produced by cold roll bonding: Experimental and numerical approachesJournal of Alloys and Compounds, 2019
- Magnetoencephalography for brain electrophysiology and imagingNature Neuroscience, 2017
- Magnetic properties and loss separation in FeSi/MnZnFe2O4 soft magnetic compositesJournal of Magnetism and Magnetic Materials, 2016
- Calculation of magnetic field noise from high-permeability magnetic shields and conducting objects with simple geometryJournal of Applied Physics, 2008
- A low-noise ferrite magnetic shieldApplied Physics Letters, 2007