Profiles of mean wind speed obtained from a 1420-ft tower are analyzed on the basis of similarity theory to determine the relationship of profile shape to lapse rate structure. A total of 274 profiles representing four observation times (0600, 1000, 1400, and 1800 CST) are used in the analysis. Thirty minute averages of the wind speed are taken at eleven levels on the tower at these observation times. The wind speed values are normalized by means of the friction velocity as well as a reference height velocity computed at the lowest observation level, and profiles for these wind speeds are grouped according to profile shape characteristics. For each group, an average profile is computed and the vertical variation of mean wind speed is compared to a logarithmic or power law profile form. Results of the study indicate that the mean wind profiles are dependent on the lapse rate structure and can be divided into “non-inversion” (lapse rates greater than isothermal) and “inversion” (lapse rates less th... Abstract Profiles of mean wind speed obtained from a 1420-ft tower are analyzed on the basis of similarity theory to determine the relationship of profile shape to lapse rate structure. A total of 274 profiles representing four observation times (0600, 1000, 1400, and 1800 CST) are used in the analysis. Thirty minute averages of the wind speed are taken at eleven levels on the tower at these observation times. The wind speed values are normalized by means of the friction velocity as well as a reference height velocity computed at the lowest observation level, and profiles for these wind speeds are grouped according to profile shape characteristics. For each group, an average profile is computed and the vertical variation of mean wind speed is compared to a logarithmic or power law profile form. Results of the study indicate that the mean wind profiles are dependent on the lapse rate structure and can be divided into “non-inversion” (lapse rates greater than isothermal) and “inversion” (lapse rates less th...