An enhanced micromechanical rock–pile interface model with application to rock‐socketed pile modeling
- 16 May 2024
- journal article
- research article
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 48 (11) , 2971-2995
Abstract
The increasing use of rock‐socketed piles highlights the importance of developing a suitable design method for their bearing capacity. This study quantifies the shear behavior of the rock–pile interface, which generally dominates the bearing capacity of rock‐socketed piles under service load. A micromechanics‐based rock–pile interface model with idealized nonuniform profile is proposed with two enhancements: (1) the slip line method together with nonlinear Hoek–Brown failure criteria is integrated to identify the critical shear displacement of rock asperity; and (2) the residual stage of shear behavior is properly considered with the rounding progress of sheared rubbles. The enhanced interface model is first validated by the direct shear test results under constant normal stiffness. Then, the interface model is implemented via user‐defined FRIC into the finite element code ABAQUS without the need of explicitly building the rock–pile interface profile. Accordingly, the model is applied to simulate and analyze two field cases involving rock‐socketed piles. Comparison between the predictions and field observed results shows this method can well capture the axial load transfer behavior of pile socket into weak rock.Keywords
Funding Information
- Research Grants Council, University Grants Committee (15210020, 15217220, 15221721, 15210322, 15226722, R5037‐18)
This publication has 22 references indexed in Scilit:
- Numerical analysis of time-dependent negative skin friction on pile in soft soilsComputers and Geotechnics, 2022
- FEM-BEM coupling analysis of vertically loaded rock-socketed pile in multilayered transversely isotropic saturated mediaComputers and Geotechnics, 2020
- Distinct element method simulations of rock-concrete interfaces under different boundary conditionsEngineering Geology, 2018
- On behavior of load transfer for drilled shafts embedded in weak rocksComputers and Geotechnics, 2017
- Experimental and numerical study of asperity degradation in the direct shear testEngineering Geology, 2016
- A micromechanics-based elastoplastic damage model for granular materials at low confining pressureInternational Journal of Plasticity, 2010
- Load transfer analysis of rock-socketed drilled shafts by coupled soil resistanceComputers and Geotechnics, 2009
- Analysis of compressible axially loaded piles in rockInternational Journal for Numerical and Analytical Methods in Geomechanics, 1994
- Ultimate bearing capacity of rock massesInternational Journal of Rock Mechanics and Mining Sciences, 1994
- Finite element modelling of rock‐socketed pilesInternational Journal for Numerical and Analytical Methods in Geomechanics, 1994