Effect of Bondline Thickness on Mixed-Mode Fracture of Adhesively Bonded Joints
Authors:
- 29 September 2011
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 87 (10) , 989-1019
Abstract
The effect of bondline thickness on the critical strain energy release rate (CSERR) was investigated using aluminum adherends and an epoxy adhesive. Complete mixed Mode I/II fracture envelopes for adhesive thicknesses ranging from 0.203 to 1.52 mm were developed using double cantilever beam (DCB), mixed-mode bending (MMB), and end notch flexure (ENF) tests methods. Bondline thickness strongly affects the CSERR for different amounts of Mode II component. Pure Mode II had the largest CSERR and showed monotonic increase with bondline thickness, whereas pure Mode I had the lowest CSERR and exhibited non monotonic relationship with bondline thickness. The shape and size of the plastic zone that develops prior to crack propagation was predicted by finite element analysis. Variation of CSERR as a function of adhesive layer thickness was shown to be related to the size of the plastic zone for Mode I and MMB 50% fracture. No correlation was observed for the MMB 75% and Mode II, however.Keywords
This publication has 20 references indexed in Scilit:
- Improved Analytical Models for Mixed-Mode Bending Tests of Adhesively Bonded JointsThe Journal of Adhesion, 2002
- The Use of a Modified Mixed Mode Bending Test for Characterization of Mixed-mode Fracture Behavior of Adhesively Bonded Metal JointsThe Journal of Adhesion, 2002
- Characterization of Bondline Thickness Effects in Adhesive JointsJournal of Composites Technology and Research, 2002
- The Effect of Damage Nucleation on the Toughness of an Adhesive JointThe Journal of Adhesion, 2001
- Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatusComposites Science and Technology, 1996
- Deformation and fracture of particulate epoxy in adhesive bondsActa Metallurgica et Materialia, 1995
- Mixed-mode bending method for delamination testingAIAA Journal, 1990
- Micromechanics of Fracture in Structural Adhesive BondsThe Journal of Adhesion, 1989
- On the correlation between the mode I failure of adhesive joints and laminated compositesEngineering Fracture Mechanics, 1986
- The Fracture Resistance of a Toughened Epoxy AdhesiveThe Journal of Adhesion, 1981