Numerical predictions of the behaviour of plain concrete targets subjected to impact
- 14 March 2018
- journal article
- research article
- Published by SAGE Publications in International Journal of Protective Structures
- Vol. 9 (3) , 313-346
Abstract
One widely used model implemented in the hydrocode ANSYS Autodyn is the Riedel–Hiermaier–Thoma material model, which is used for the prediction of concrete behaviour under severe loading, such as blast and impact. In the Riedel–Hiermaier–Thoma model, parameters are adjusted to be a function of the compressive strength of specific concrete. This advantage enables occasional users (and those who cannot conduct experiments to determine all the required concrete parameters) to input only this parameter, while the rest is automatically calculated by default settings. This study is an attempt to calibrate (not modify) this model, with the least number of possible changes, to better predict the performance of concrete targets, particularly spalling and scabbing phenomena, impacted by hard projectiles. It is shown that the present calibration of the Riedel–Hiermaier–Thoma material model performed well when compared to the default settings currently available in the model.Keywords
This publication has 26 references indexed in Scilit:
- Discussion on the suitability of concrete constitutive models for high-rate response predictions of RC structuresInternational Journal of Impact Engineering, 2017
- A general concrete model in hydrocodes: Verification and validation of the Riedel–Hiermaier–Thoma model in LS-DYNAInternational Journal of Protective Structures, 2017
- Advanced Concrete Model in Hydrocode to Simulate Concrete Structures under Blast LoadingAdvances in Civil Engineering, 2016
- Effect of reinforcement on the response of concrete panels to impact of hard projectilesInternational Journal of Impact Engineering, 2014
- Energy absorption during projectile perforation of thin steel plates and the kinetic energy of ejected fragmentsInternational Journal of Impact Engineering, 2009
- Normal perforation of reinforced concrete target by rigid projectileInternational Journal of Impact Engineering, 2008
- A numerical simulation on the perforation of reinforced concrete targetsInternational Journal of Impact Engineering, 2005
- Impact loading of plates and shells by free-flying projectiles: A reviewInternational Journal of Impact Engineering, 1996
- Perforation of concrete slabs with 48 MPa (7 ksi) and 140 MPa (20 ksi) unconfined compressive strengthsInternational Journal of Impact Engineering, 1992
- A review of procedures for the analysis and design of concrete structures to resist missile impact effectsNuclear Engineering and Design, 1976