Effect of Arc Currents on the Mechanical, High Temperature Oxidation and Corrosion Properties of CrSiN Nanocomposite Coatings
Open Access
Abstract
In methods for multi-arc ion plating technology, the behavior and characteristics of the arc spot determine the physical characteristics of arc plasma and the properties of the subsequent deposited coatings. In this paper, the effect of arc currents on the hardness, friction coefficient, high temperature oxidation, and corrosion properties of the CrSiN coatings was studied. According to the XRD and SEM results, with the increase of arc currents, the coatings grew preferentially to the CrN (111) crystal direction, and the CrN (220) crystal phase appeared at high currents of 90 A. In addition, the number of large particles increased when the current exceeded 70 A. The HR-TEM results confirmed the formation of nanocomposite structure of nanocrystalline of CrN embedded into the amorphous phase of Si3N4 as explored by XRD. The maximum hardness was achieved at 3120 Hv when the coatings were deposited under currents around 70 A. However, the hardness values decreased with further increase of arc currents. From the contact of ceramic balls with the wear of coatings, the surface of coatings gradually produced friction marks, and the friction force increased from a steady friction force to a dynamic friction force. The high temperature oxidation results showed that fewer oxides were formed on the surface of the coatings when oxidized at 800 °C. It was also found that CrSiN nanocomposite coatings prepared at an arc current of 70 A had a larger corrosion potential and polarization impedance, which could effectively protect the tool matrix.Keywords
Funding Information
- Natural Science Foundation of Guangdong Province (2021A1515011928)
This publication has 28 references indexed in Scilit:
- Superhard V-Si-N coatings (>50GPa) with the cell-like nanostructure prepared by magnetron sputteringSurface and Coatings Technology, 2013
- Thermal stability and high-temperature oxidation behavior of Si–Cr–N coatings with high content of siliconSurface and Coatings Technology, 2013
- ATMOSPHERIC INDUCTION PLASMA SPRAYINGHigh Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, 2011
- Microstructural control of Cr–Si–N films by a hybrid arc ion plating and magnetron sputtering processActa Materialia, 2009
- Deposition and characterization of CrN/Si3N4 and CrAlN/Si3N4 nanocomposite coatings prepared using reactive DC unbalanced magnetron sputteringSurface and Coatings Technology, 2007
- Toughness of hard nanostructured ceramic thin filmsSurface and Coatings Technology, 2007
- Effects of Al contents on microstructures of Cr1−Al N and Zr1−Al N films synthesized by cathodic arc methodSurface and Coatings Technology, 2005
- Microstructure and properties of Ti–Si–N nanocomposite filmsJournal of Vacuum Science & Technology A, 2002
- Ti1−xAlxN, Ti1−xZrxN and Ti1−xCrxN films synthesized by the AIP methodSurface and Coatings Technology, 2000
- Improving the properties of titanium nitride by incorporation of siliconSurface and Coatings Technology, 1998