Electrospun nanofiber interleaving through double infusion method to induce pseudo‐ductile damage resistance response in carbon/epoxy composites
- 25 January 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (6) , 5707-5724
Abstract
Carbon composites are susceptible to invisible damage development such as matrix cracking, fiber kinking, and interfacial debonding upon external transverse loading. These incipient damages may interact to evolve into life‐limiting delamination propagating both in in‐plane and transverse directions. This study addressed that by interleaving carbon/epoxy composites with electrospun nylon 6 nanofibers adopting a double infusion method. Damage resistance results showed that the optimum nanofiber areal weight (17.35 g/m2) offered a 27% improvement in specific total toughness. The emergence of pseudo‐ductility substantially enhanced the plastic toughness (46.15%) of interleaved composites. The load required for initial matrix cracking was 65.49% higher, and number of matrix cracking events was suppressed by 84.11% at the optimum areal weight of interleave. Fractography revealed frequent interlaminar crossings and delamination crack bridging as two major toughness mechanisms. Both the external damage area and delaminated area increased with increment in nanofiber areal weight.Highlights: Electrospun nanofibre interleaved carbon/epoxy composites were fabricated through a double infusion method to characterize damage resistance. Acoustic data of matrix cracking was rationalized to show the effectiveness of nanofiber interleaves in suppressing this damage type. Microstructural factors and mechanisms contributing to the improved toughness of optimally interleaved composites were identified. External damage/delaminated areas of interleaved composites were correlated with nanofiber areal weights.Keywords
This publication has 40 references indexed in Scilit:
- A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminatesComposites Part A: Applied Science and Manufacturing, 2016
- Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminatesComposites Science and Technology, 2016
- Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veilsComposites Science and Technology, 2015
- Effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy compositePolymer Testing, 2013
- Manufacture of Void-Free Electrospun Polymer Nanofiber Composites with Optimized Mechanical PropertiesACS Applied Materials & Interfaces, 2012
- The tensile properties of electrospun nylon 6 single nanofibersJournal of Polymer Science Part B: Polymer Physics, 2010
- Delamination in the context of composite structural design2008
- Failure mechanisms of laminated composites subjected to static indentationComposite Structures, 2006
- An energy based damage model for thin laminated compositesComposites Science and Technology, 2006
- Comparative ultrasonic analysis of damage in CFRP under static indentation and low-velocity impactComposites Science and Technology, 1994