Abstract
High-tech industries need materials having unique physical and chemical properties and a low cost. The use of rare earth metals (REMs) as alloying additives to a number of metals was shown to form alloys necessary for modern engineering. The prospects of using REMs as coating components are noteworthy. This paper presents the results of studying the coating of praseodymium on metallic nickel by the application of emf. For this purpose, a short-circuited galvanic cell with a soluble anode made of a lead–sodium alloy is implemented. Sodium is introduced into the alloy via electrolysis to a certain content (10.5 C). During coating, the electrolyte is an equimolar mixture of sodium and potassium chlorides with the addition of 0.5–7 wt % praseodymium trichloride. Intermetallic compounds are synthesized in the temperature range 1073–1173 K. Nickel saturation with praseodymium is carried out for 30 min. The dependences of the specific increment in the nickel sample weight on the temperature and the praseodymium chloride concentration of in the melt are obtained by a gravimetric method. The graphical dependences of the sample weight increment on the PrCl3 concentration in the electrolyte are curved and have a horizontal linear section at 3–4 wt % praseodymium chloride. This finding suggests that, at a concentration of 3 wt % or more, the rate of diffusion mass transfer remains almost unchanged. As the temperature increases, the specific sample weight increment increases. The linear temperature dependence of the specific increment suggests that the limiting stage of the saturation process is the delivery of praseodymium ions to the electrode surface. As a result of the conducted research, we proposed a mechanism and technological recommendations for forming a nickel coating from the equimolar NaCl–KCl melt with the addition of praseodymium trichloride by the application of emf. The phase compositions of the synthesized samples are analyzed using an XRD-7000S (Japan) powder X-ray diffractometer. The results obtained demonstrate the presence of the NiPr intermetallic compound.