Study of the Wear Resistance of Conductive Poly Lactic Acid Monofilament 3D Printed onto Polyethylene Terephthalate Woven Materials
Open Access
Abstract
Wear resistance of conductive Poly Lactic Acid monofilament 3D printed onto textiles, through Fused Deposition Modeling (FDM) process and their electrical conductivity after abrasion are important to consider in the development of smart textiles with preserved mechanical and electrical properties. The study aims at investigating the weight loss after abrasion and end point of such materials, understanding the influence of the textile properties and 3D printing process parameters and studying the impact of the abrasion process on the electrical conductivity property of the 3D printed conductive polymers onto textiles. The effects of the 3D printing process and the printing parameters on the structural properties of textiles, such as the thickness of the conductive Poly Lactic Acid (PLA) 3D printed onto polyethylene terephthalate (PET) textile and the average pore sizes of its surface are also investigated. Findings demonstrate that the textile properties, such as the pattern and the process settings, for instance, the printing bed temperature, impact significantly the abrasion resistance of 3D printed conductive Poly Lactic Acid (PLA) onto PET woven textiles. Due to the higher capacity of the surface structure and stronger fiber-to-fiber cohesion, the 3D printed conductive polymer deposited onto textiles through Fused Deposition Modeling process have a higher abrasion resistance and lower weight loss after abrasion compared to the original fabrics. After printing the mean pore size, localized at the surface of the 3D-printed PLA onto PET textiles, is five to eight times smaller than the one of the pores localized at the surface of the PET fabrics prior to 3D printing. Finally, the abrasion process did considerably impact the electrical conductivity of 3D printed conductive PLA onto PET fabric.Keywords
Funding Information
- European Commission (532704-EM-5-2017-1-FR-ERA)
This publication has 26 references indexed in Scilit:
- Influence of coating parameters on textile and electrical properties of a poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate)/polyurethane-coated textileTextile Research Journal, 2013
- Analysis of Abrasion Characteristics in Textiles2012
- Tribological investigation of the effects of particle size, loading and crystallinity on poly(ethylene) terephthalate nanocompositesWear, 2008
- Phase equilibrium and charge fractionation in polyelectrolyte solutionsJournal of Polymer Science Part B: Polymer Physics, 2007
- Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly(ethylene) terephthalate compositesWear, 2005
- Influence of Chenille Yarn Manufacturing Parameters on Yarn and Upholstery Fabric Abrasion ResistanceTextile Research Journal, 2004
- Cellulase Treatment of Durable Press Finished Cotton Fabric: Effects on Fabric Strength, Abrasion Resistance, and HandleTextile Research Journal, 2003
- Influence of Varying Structural Parameters on Abrasion Characteristics of 50/50 Wool/Polyester Blended FabricsTextile Research Journal, 2003
- Introduction1999
- Pilling, Abrasion, and Tensile Properties of Fabrics from Open-End and Ring Spun Yarns 1Textile Research Journal, 1989