Numerical Investigation of the In-Plane Performance of Masonry-Infilled RC Frames with Sliding Subpanels
- 1 February 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 143 (2)
Abstract
A number of construction techniques have been proposed to improve the seismic performance of infilled RC frames by increasing the strength and stiffness of the infill and/or the frame. The increase of the seismic capacity of infilled frames with these techniques can improve substantially their seismic performance as long as the demand does not exceed the capacity, but it can eventually lead to brittle failures once the capacity is exceeded. This study assesses numerically a new construction technique that introduces flexibility to the system to ensure its ductile behavior and minimal damage by splitting the infill in subportions and allowing the sliding along the horizontal joints connecting these subportions. A numerical model, validated with data from tests on the components of the proposed structural system and able to capture the interaction between them, has been developed to provide insight into the load-transfer mechanism that develops, and to optimize the proposed detailing. A parametric study investigates the sensitivity of the system to the design parameters, infill’s geometry, and material properties, so that design recommendations can be made.Keywords
This publication has 23 references indexed in Scilit:
- Damage Control for Clay Masonry Infills in the Design of RC Frame StructuresJournal of Earthquake Engineering, 2012
- Infill Walls with Sliding Joints to Limit Infill-Frame Seismic Interaction: Large-Scale Experimental TestJournal of Earthquake Engineering, 2011
- Shake‐table tests of a three‐story reinforced concrete frame with masonry infill wallsEarthquake Engineering & Structural Dynamics, 2011
- Seismic Performance of Autoclaved Aerated Concrete (AAC) Masonry: From Experimental Testing of the In-Plane Capacity of Walls to Building Response SimulationJournal of Earthquake Engineering, 2011
- An engineered infilled frame: Behavior and calibrationJournal of Constructional Steel Research, 2010
- Finite-Element Modeling of Nonlinear Behavior of Masonry-Infilled RC FramesJournal of Structural Engineering, 2010
- Finite Element Modeling of Masonry-Infilled RC FramesJournal of Structural Engineering, 1997
- Interface Model Applied to Fracture of Masonry StructuresJournal of Structural Engineering, 1994
- An appraisal of smeared crack models for masonry shear wall analysisComputers & Structures, 1991
- Determination of fracture zone properties in mixed mode I and IIEngineering Fracture Mechanics, 1990