Evaluation of Irradiation Hardening of P92 Steel under Ar Ion Irradiation
Open Access
Abstract
P92 steel was irradiated with Ar ion up to 10 dpa at 200, 400, and 700 °C. The effect of Ar ion irradiation on hardness was investigated with nanoindentation tests and microstructure analyses. It was observed that irradiation-induced hardening occurred in the steel after Ar ion irradiation at all three temperatures to 10 dpa. The steel exhibited significant hardening at 200 and 700 °C, and slight hardening at 400 °C under Ar ion irradiation. Difference in the magnitude of irradiation-induced hardening at different temperature in the steel is attributed to different changes in the microstructure of the steel that arose from the irradiation. Irradiation-induced hardening in the P92 steel irradiated at 200 °C is attributed to the occurrence of both dislocation loops and other fine irradiation defects during irradiation. Slight hardening in the steel irradiated at 400 °C mainly arises from the annihilation of defect clusters at this temperature. The occurrence of fine Ar bubbles with high number density during the Ar ion irradiation at 700 °C resulted in the significant hardening in the steel.Keywords
This publication has 42 references indexed in Scilit:
- Hardening mechanisms of reduced activation ferritic/martensitic steels irradiated at 300°CJournal of Nuclear Materials, 2009
- Celebrating the 100th anniversary of the Stoney equation for film stress: Developments from polycrystalline steel strips to single crystal silicon wafersThin Solid Films, 2009
- Structural materials for Gen-IV nuclear reactors: Challenges and opportunitiesJournal of Nuclear Materials, 2008
- Void swelling in a 9Cr ferritic/martensitic steel irradiated with energetic Ne-ions at elevated temperaturesJournal of Nuclear Materials, 2008
- Ferritic/martensitic steels for next-generation reactorsJournal of Nuclear Materials, 2007
- Effect of irradiation temperature on void swelling of China Low Activation Martensitic steel (CLAM)Materials Characterization, 2007
- Microstructural development in advanced ferritic–martensitic steel HCM12AJournal of Nuclear Materials, 2006
- Materials to deliver the promise of fusion power – progress and challengesJournal of Nuclear Materials, 2004
- Microstructural changes in a low-activation Fe–Cr–Mn alloy irradiated with 92 MeV Ar ions at 450°CJournal of Nuclear Materials, 2000
- Irradiation hardening of reduced activation martensitic steelsJournal of Nuclear Materials, 1996