Correlation between Microstructural Evolution and Mechanical Properties of 2000 MPa Cold-Drawn Pearlitic Steel Wires during Galvanizing Simulated Annealing
Author:
Open Access
Abstract
In the present experiment, hot-dip galvanizing simulated annealing of 2000 MPa cold-drawn pearlitic steel wires was carried out at 450 °C. The effects of microstructural evolution on the mechanical properties of the as-prepared wires were analyzed through scanning electron microscopy (SEM), transmission electron microscopy (TEM), tensile test, torsion test, and Vickers hardness test. In addition, the relationship between torsion laps and microstructural evolution of cold-drawn pearlitic steel wires was investigated in detail. It was found that the torsional performance of the wires deteriorated after annealing at 450 °C for 2–5 min, and the corresponding microstructural evolution was accompanied by the partial degradation of lamellar pearlites due to the diffusion and dislocation pinning of dissolved carbon atoms in ferrites, and it is not feasible to achieve the matching of strength and torsion laps by prolonging the holding time. The deterioration in torsional performance can be attributed to the microstructural difference between the surface and the center of the annealed wires. When the proportion of non-lamellar structure between the surface and the center in each specimen exceeded 8%, the microhardness difference was found to be greater than 40 HV and the torsion lap was less than 3 circles.Keywords
Funding Information
- the national key Research and Development Program of China (2017YFB0304800)
- the Hubei Provincial Natural Science Foundation of Innovation Team (2018CFB304)
- the Hubei Provincial Department of Education Science and Technology Project (B2018235)
- the Jingmen Science and Technology Planning Project (2018YFYB054)
This publication has 22 references indexed in Scilit:
- Cold-drawn pearlitic steel wiresProgress in Materials Science, 2016
- Cementite nano-crystallization in cold drawn pearlitic wires instigated by low temperature annealingScripta Materialia, 2016
- Comparative study and quantification of cementite decomposition in heavily drawn pearlitic steel wiresMaterials Science and Engineering: A, 2015
- Hierarchical structures in cold-drawn pearlitic steel wireActa Materialia, 2013
- Revealing microstructural and mechanical characteristics of cold-drawn pearlitic steel wires undergoing simulated galvanization treatmentMaterials Science and Engineering: A, 2012
- Effects of post-deformation annealing conditions on the behavior of lamellar cementite and the occurrence of delamination in cold drawn steel wiresJournal of Materials Processing Technology, 2009
- Effects of the Annealing Temperature and Time on the Microstructural Evolution and corresponding the Mechanical Properties of Cold-Drawn Steel WiresMetals and Materials International, 2008
- Application of cold drawn lamellar microstructure for developing ultra-high strength wiresTransactions of Nonferrous Metals Society of China, 2007
- Cementite dissolution in heavily cold drawn pearlitic steel wiresActa Materialia, 1997
- Investigation of carbide phase in strained steel by the method of nuclear gamma resonancePhysica Status Solidi (a), 1972