Comparison of polyimide/multiwalled carbon nanotube (MWNT) nanocomposites by in situ polymerization and blending
Authors:
- 12 February 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 116 (6) , 3111-3117
Abstract
In this research, multiwalled carbon nanotube (MWNT) was oxidized and then modified to form carboxylic groups (COOH) on the surface and the end of the tube. After that, the MWNT was added to polyimide matrix to enhance its mechanical and electrical properties by in situ polymerization and blending. The PI/MWNT composites were obtained by spin coating and multistep thermal curing process. The comparison of in situ polymerization and blending as well as the effect of unmodified and modified MWNT were discussed in this study. The results indicate that in situ polymerization is able to make a perfect dispersion by adding modified MWNT into polyimide matrix. Thermal and mechanical properties of the composites can be improved by hydrogen bonding interaction between the modified MWNT and polyimide matrix. Electrical resistance of the composites can be decreased to meet the criterion of electrostatic charge (ESC) mitigation as the surface resistance is reduced into the range of 106–1010 Ω/cm2 by adding modified MWNT. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 29 references indexed in Scilit:
- Hybrid silica-polyimide composite membranes: gas transport propertiesJournal of Membrane Science, 2002
- Hydrogen storage in single-walled carbon nanotubesApplied Physics Letters, 2000
- Extreme Oxygen Sensitivity of Electronic Properties of Carbon NanotubesScience, 2000
- Nanotube Molecular Wires as Chemical SensorsScience, 2000
- Carbon nanotubes: nanomechanics, manipulation, and electronic devicesApplied Surface Science, 1999
- Nanotube NanodeviceScience, 1997
- Low-Density, Mutually Interpenetrating Organic-Inorganic Composite Materials via Supercritical Drying TechniquesChemistry of Materials, 1994
- In situ polymerization of tetraethoxysilane in polymers: chemical nature of the interactionsPolymer, 1992
- Dilation of polymers by sorption of carbon dioxide at elevated pressures. 1. Silicone rubber and unconditioned polycarbonateMacromolecules, 1986
- New materials for contact lenses prepared from Si- and Ti-alkoxides by the sol-gel processJournal of Non-Crystalline Solids, 1984