On the use of nominal stresses to predict the fatigue strength of welded joints under biaxial cyclic loading
Authors:
- 1 November 2004
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 27 (11) , 1005-1024
Abstract
In this paper, the modified Wöhler curve method proposed by Susmel and Lazzarin is employed to predict the fatigue life of welded connections subjected to biaxial cyclic loading. This criterion is reformulated here in order not to take into account the mean stress effect, as suggested by several design codes (at least when welded connections are not completely stress relieved). The accuracy of the proposed method in fatigue lifetime estimation was evaluated by using a number of data sets taken from the literature. The modified Wöhler curve method was applied in terms of nominal stresses and was calibrated using the uniaxial and torsional fatigue curve determined by reanalysing the experimental data, as well as using the standard fatigue curves of the Eurocode 3. The proposed approach was seen to be successful, giving multiaxial fatigue life predictions located within the widest scatter band related either to uniaxial or to torsional data, independently of both out‐of‐phase angle and load ratio value. Finally, the accuracy of the modified Wöhler curve method was compared to the one obtained by applying the procedure suggested by the Eurocode 3: the proposed criterion is demonstrated to be much more accurate and reliable than the standard one.Keywords
This publication has 21 references indexed in Scilit:
- A stress‐based method to predict lifetime under multiaxial fatigue loadingsFatigue & Fracture of Engineering Materials & Structures, 2003
- Two methods for predicting the multiaxial fatigue limits of sharp notchesFatigue & Fracture of Engineering Materials & Structures, 2003
- Critical plane approach for the assessment of the fatigue behaviour of welded aluminium under multiaxial loadingFatigue & Fracture of Engineering Materials & Structures, 2003
- Some new methods for predicting fatigue in welded jointsInternational Journal of Fatigue, 2002
- A bi‐parametric Wöhler curve for high cycle multiaxial fatigue assessmentFatigue & Fracture of Engineering Materials & Structures, 2002
- Notch stress intensity factors and fatigue strength of aluminium and steel welded jointsInternational Journal of Fatigue, 2001
- Stress field parameters to predict the fatigue strength of notched componentsThe Journal of Strain Analysis for Engineering Design, 1999
- Review of fatigue strength assessment of nonwelded and welded structures based on local parametersInternational Journal of Fatigue, 1996
- Multiaxial fatigue of welded joints under in-phase and out-of-phase local strains and stressesInternational Journal of Fatigue, 1995
- Engineering Steels under Combined Cyclic and Static StressesProceedings of the Institution of Mechanical Engineers, 1949