Retractable Locking System Driven by Shape Memory Alloy Actuator for Lightweight Soft Robotic Application
- 10 October 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (4) , 12185-12192
Abstract
Shape memory alloy actuators (SMA) are widely used in robots owing to their flexibility and light weight. However, there is a drawback in that SMAs need to be used as a bundle owing to their lower force density than the motor. In addition, SMAs require continuous current to maintain a contracted state, which results in the overheating of the actuator, causing breakdown and excessive energy consumption. This study presents a new locking system that can mechanically hold the contracted state of an actuator without consuming energy to overcome the disadvantages of a spring-type SMA. The locking mechanism was designed with a ratchet structure and pawl to prevent the actuator from stretching in the opposite direction when locked. In addition, to switch the locking and unlocking states with a single one-way actuation, a bistable retractable mechanism was applied to the system. Repeatability experiments and an analysis of the locking system resolution were conducted to validate the performance of the proposed mechanism. Furthermore, an underactuated finger applied to the proposed locking system was fabricated, and its feasibility is experimentally presented.Keywords
Funding Information
- National Research Foundation of Korea (2020R1A4A1018227, 2021R1A2C3012387)
This publication has 25 references indexed in Scilit:
- Robotic hand with locking mechanism using TCP muscles for applications in prosthetic hand and humanoids2016
- Experimental study on control fins of a small flying vehicle using piezo-composite actuatorsAdvanced Composite Materials, 2016
- Lock Your Robot: A Review of Locking Devices in RoboticsIEEE Robotics & Automation Magazine, 2015
- A Foldable Antagonistic ActuatorIEEE/ASME Transactions on Mechatronics, 2014
- Engineering design framework for a shape memory alloy coil spring actuator using a static two-state modelSmart Materials and Structures, 2012
- Shape morphing of aircraft wing: Status and challengesMaterials & Design (1980-2015), 2010
- Use of a Ni60Ti shape memory alloy for active jet engine chevron application: II. Experimentally validated numerical analysisSmart Materials and Structures, 2009
- Optimized design of the underactuated robotic hand2006
- Role of intra-abdominal pressure in the unloading and stabilization of the human spine during static lifting tasksEuropean Spine Journal, 2005
- Artificial Muscle Technology: Physical Principles and Naval ProspectsIEEE Journal of Oceanic Engineering, 2004