Time-varying friction thermal characteristics research on a dry clutch
Authors:
- 27 January 2014
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 228 (5) , 510-517
Abstract
In the continuous shifting condition, frequent working on a dry clutch causes a sharp internal temperature rise on the friction surfaces of the clutch. In order to determine the force on the friction surfaces of the clutch accurately, the elastic characteristics produced by the cushion spring, the link strip and the diaphragm spring are analysed in this paper. Then, through monitoring of the throw-out bearing force, the friction torque of the clutch and the slipping-friction power can be estimated. Finally, based on three thermal loads on the friction surfaces of the dry clutch (including the initial environment temperature, the slipping-friction power and the convection heat), its thermal field distribution with changes in the time and the radius during the entire shift process can be acquired. In the earlier phase (before approximately 180 s), the surface temperature distribution varies with the slipping-friction power. Also the slipping-friction power plays a major role in the thermal load on the friction surfaces. However, the slipping-friction power does not do so in the later phase (after about 180 s) owing to the difficulty with heat radiation. This means that the time-varying thermal characteristics of a dry clutch are related to the working time of the clutch.Keywords
This publication has 7 references indexed in Scilit:
- Design of the Clutch Friction Plate Temperature Acquisition System Based on ZigbeeApplied Mechanics and Materials, 2012
- Three-Dimensional Thermohydrodynamic Analysis of a Wet Clutch With Consideration of Grooved Friction SurfacesJournal of Tribology, 2010
- Thermal Behaviour of a Slipping Wet Clutch ContactTribology Letters, 2010
- Torque Transmissibility Assessment for Automotive Dry-Clutch EngagementIEEE/ASME Transactions on Mechatronics, 2010
- Thermal influence on torque transfer of wet clutches in limited slip differential applicationsTribology International, 2007
- Dynamik der Kraftfahrzeuge2004
- A Simplified Approach to Modeling Thermal Effects in Wet Clutch Engagement: Analytical and Experimental ComparisonJournal of Tribology, 1999