Contact wetting angle as a characterization technique for processing CdTe/CdS solar cells
- 16 May 2006
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 15 (2) , 93-111
Abstract
The feasibility of measuring contact wetting angles to characterize processing induced changes to thin film semiconductors in CdTe/CdS solar cells is evaluated. The contact angles of water and formamide are used to determine the polar and dispersive surface energies of the thin films using two analysis methods. Changes in surface energies resulting from processing are correlated to changes in surface chemistry and structure detected by glancing incidence X‐ray diffraction (GIXRD), X‐ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). Surface energies are evaluated for sputtered In2O3:SnO2, chemical surface‐deposited CdS, and physical vapor‐deposited (PVD) CdTe thin films under as‐deposited and treated conditions. Treatments include thermal anneal in air, argon, and CdCl2ambient as well as surface etching. Indium tin oxide (ITO) and CdS films exhibit increased polar surface energy corresponding to enhanced crystallization of surfaces resulting from processing and increasing CdS growth temperature. Native oxidation of PVD CdTe (111)‐oriented film surfaces occurs rapidly and is readily detected by changes in contact angle. Surface energies of PVD (111)‐oriented CdTe stored under various humidities prior to processing are energetically similar due to native oxidation. The polar energy of CdTe surfaces is affected by the addition or removal of crystalline surface oxides during film processing. Copyright © 2006 John Wiley & Sons, Ltd.Keywords
This publication has 31 references indexed in Scilit:
- Solar cell efficiency tables (version 26)Progress in Photovoltaics: Research and Applications, 2005
- Thin‐film solar cells: an overviewProgress in Photovoltaics: Research and Applications, 2004
- Chemical trends of defect formation and doping limit in II-VI semiconductors: The case of CdTePhysical Review B, 2002
- Thermochemical and Kinetic Aspects of Cadmium Telluride Solar Cell ProcessingMRS Proceedings, 2001
- Study of GaAs(001) Surfaces Treated in Aqueous HCl SolutionsJapanese Journal of Applied Physics, 1997
- Chemical treatment effect of Si(111) surfaces in F-based aqueous solutionsJournal of Applied Physics, 1996
- Improvement of High Temperature Water Rinsing and Drying for HF‐Last Wafer CleaningJournal of the Electrochemical Society, 1996
- An evaluation of the sessile drop technique for the study of (Hg, Cd)Te surfacesSemiconductor Science and Technology, 1993
- Surface properties of clean, and with adsorbed oxygen, surfaces of CdTe (110), {111}, and (100) and of CdSe {0001} studied by electron-energy-loss spectroscopy and Auger-electron spectroscopyPhysical Review B, 1980
- Estimation of the surface free energy of polymersJournal of Applied Polymer Science, 1969