Optimum force balancing of a planar parallel manipulator
Authors:
- 1 May 2003
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 217 (5) , 515-524
Abstract
This paper focuses on optimum force balancing of a planar parallel manipulator, articulated with revolute joints, with a combination of a proper distribution of link masses and two springs connected to the driving links. After conducting the static force analysis of the mechanism, the force balancing is formulated as an optimization problem such that a mean-square root of the sum-squared values of bearing and spring forces is minimized throughout an operation range of the manipulator, provided that a set of balancing constraints consisting of balancing conditions and the sizes of some inertial and geometric parameters are satisfied. The minimization of bearing forces and spring forces adds to the life of bearings and springs, transmits less shaking force and moment to the ground, decreases wear in the mechanism components and consequently reduces the actuation burden on the actuators when the manipulator is in motion. Optimization results indicate that the proposed optimization approach is systematic, versatile and easy to implement for the optimal balancing of the parallel manipulator and other kinematic chains.Keywords
This publication has 27 references indexed in Scilit:
- Kinematic and dynamic design of four-bar linkages by links counterweighing with variable input speedMechanism and Machine Theory, 2001
- The singularity analysis of an in-parallel hand controller for force-reflected teleoperationIEEE Transactions on Robotics and Automation, 1995
- Synthesis and analysis of a new class of six‐degree‐of‐freedom parallel minimanipulatorsJournal of Robotic Systems, 1993
- Workspace and Mobility of a Closed- Loop ManipulatorThe International Journal of Robotics Research, 1986
- Structural Kinematics of In-Parallel-Actuated Robot-ArmsJournal of Mechanical Design, 1983
- Balancing of linkages—an updateMechanism and Machine Theory, 1983
- Design of geared 5-bar mechanisms for unlimited crank rotations and optimum transmissionMechanism and Machine Theory, 1978
- Momentum Balancing of Four-Bar LinkagesJournal of Engineering for Industry, 1976
- Dynamic analysis used to complete the design of a mechanismJournal of Mechanisms, 1970
- A New Method for Completely Force Balancing Simple LinkagesJournal of Engineering for Industry, 1969