Frequency Analysis of a Rotating Cantilever Beam Using Assumed Mode Method with Coupling Effect#
Authors:
- 1 April 2006
- journal article
- research article
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 34 (1) , 25-47
Abstract
A frequency response analysis for a rotating cantilever beam is presented in this study. The equations of motion are derived from Hamilton's principle. An assumed mode method is used for analyzing the vibration frequency characteristic. The equations are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of rotating angular speed are investigated through numerical study. With the coupling effect ignored, the analysis results are consistent with the results obtained by the conventional method. As the angular speed increases, the bending natural frequencies increase monotonically and the stretching natural frequencies decrease. With the coupling effect considered, when the angular speed increases up to a certain value, there exists the warping speed that is in relation with the slenderness ratio.Keywords
This publication has 9 references indexed in Scilit:
- Vibration analysis of a high-speed spindle under the action of a moving massJournal of Sound and Vibration, 2004
- DYNAMIC RESPONSE OF A ROTATING FLEXIBLE ARM CARRYING A MOVING MASSJournal of Sound and Vibration, 2002
- DYNAMIC ANALYSIS OF A ROTATING CANTILEVER BEAM BY USING THE FINITE ELEMENT METHODJournal of Sound and Vibration, 2002
- VIBRATION ANALYSIS OF A ROTATING TIMOSHENKO BEAMJournal of Sound and Vibration, 2001
- DYNAMICS OF A FLEXIBLE BEAM CARRYING A MOVING MASS USING PERTURBATION, NUMERICAL AND TIME-FREQUENCY ANALYSIS TECHNIQUESJournal of Sound and Vibration, 2000
- VIBRATION ANALYSIS OF ROTATING CANTILEVER BEAMSJournal of Sound and Vibration, 1998
- Dynamics of a Flexible Cantilever Beam Carrying a Moving MassNonlinear Dynamics, 1998
- Vibration of a rotating beam with tip massJournal of Sound and Vibration, 1979
- Bending Frequency of a Rotating Cantilever BeamJournal of Applied Mechanics, 1958