Cooling Of Automotive Pistons: Study Of Liquid-Cooling Jets
Authors:
- 1 October 1993
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The development of more efficient and powerful internal combustion engines requires the use of new technologies. In general, the pistons of these engines are subjected to higher heat fluxes in the: ring zone, oil gallery, piston undercrown. This higher heat flux in the rings zone demands the use of new constructive technologies, such as, heat resistant materials and the use of rings holder. As for the cooling gallery and undercrown, it is required more detailed knowledge of the interaction between these piston regions and cooling oil jets. The heat transfer problem is the unknown convective heat transfer distribution. Oil circulation through the gallery during the piston cycle is analysed. Oil jets impingement models are studied for the undercrown. Using numerical simulation (finite elements method) temperature profiles and heat fluxes are evaluated. Results are compared with experimental measurements on piston engines.Keywords
This publication has 7 references indexed in Scilit:
- Convective Heat Transfer by Impingement of Circular Liquid JetsJournal of Heat Transfer, 1991
- The effect of inclination on local heat transfer under an axisymmetric, free liquid jetInternational Journal of Heat and Mass Transfer, 1991
- Local Heat Transfer Coefficients Under an Axisymmetric, Single-Phase Liquid JetJournal of Heat Transfer, 1991
- Heat transfer from round impinging jets to a flat plateInternational Journal of Heat and Mass Transfer, 1983
- Heat Transfer Characteristics of an Obliquely Impinging Circular JetJournal of Heat Transfer, 1980
- Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces1977
- OBLIQUE IMPINGEMENT OF CIRCULAR TURBULENT JETSJournal of Hydraulic Research, 1976