Effect of shear on interdiffusion in an Al–Cu binary couple: a molecular dynamics study
Open Access
- 17 November 2026
- journal article
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 34 (8) , 085007
Abstract
Shear between the particles can strongly influence diffusion-assisted mixing across dissimilar metal interfaces under thermomechanical conditions. In this study, classical molecular dynamics simulations were performed to quantify the effects of temperature and applied interfacial shear on interdiffusion in a binary Al–Cu couple. A Cu(100)/Al(100) interface model was employed to perform the simulations over a temperature range of 675–900 K, while shear was imposed through an applied interfacial shear velocity ranging from 3 to 15 ms − 1 . Effective interdiffusion coefficients were extracted from the time-dependent Cu concentration profiles using the Boltzmann–Matano method. Under isothermal annealing, the effective interdiffusion coefficients increased from 6 × 10 − 9 to 40 × 10 − 9 cm 2 s − 1 as the temperature increased from 675 K to 900 K following Arrhenius behavior across the studied temperature range, with an effective activation energy of ∼ 0.38 eV. The calculated temperature-dependent coefficients are comparable to the range of experimentally reported interdiffusion coefficients for Al–Cu intermetallic systems. When shear was applied, interdiffusion was accelerated relative to purely thermally activated diffusion, with larger shear velocities producing higher interdiffusion coefficients. Specifically, the shear-assisted effective interdiffusion coefficients increased from 1.0 × 10 − 7 to 12.8 × 10 − 7 cm 2 s − 1 as the shear velocity increased from 3 to 15 ms − 1 . These shear-assisted coefficients are at least one order of magnitude higher than those obtained under isothermal conditions. Species-specific analysis further showed that Cu diffusion into the Al region contributes more strongly than Al diffusion into the Cu region, indicating asymmetric atomic transport across the interface. The study highlights an important role of shear-driven effects in governing interdiffusion and provides atomistic insight into diffusion-assisted mixing in Al–Cu systems under thermomechanical conditions.Keywords
Funding Information
- Laboratory Directed Research and Development
This publication has 70 references indexed in Scilit:
- Current Implementation Status of Cold Spray Technology: A Short ReviewJournal of Thermal Spray Technology, 2022
- Microstructural evolution in Cu–Nb processed via friction consolidationJournal of Materials Science, 2021
- Interfacial Reaction during Friction Stir Welding of Al and CuMetallurgical and Materials Transactions A, 2011
- Friction Processing TechnologiesWelding in the World, 2003
- Principle of equal-channel angular pressing for the processing of ultra-fine grained materialsScripta Materialia, 1996
- Interdiffusion in the aluminium-rich solid solution of Al-Cu alloysJournal of Materials Science Letters, 1985
- Vacancy concentrations in metalsJournal of Nuclear Materials, 1978
- Self-diffusion in copper at “low” temperaturesPhysica Status Solidi (a), 1977
- Monovacancy formation energy in copper, silver, and gold by positron annihilationApplied Physics A, 1975
- Self-diffusion in aluminum at low temperaturesMetallurgical Transactions, 1972