Experimental Investigation of the Mean and Turbulent Flow Characteristics at the Exit of Automotive Vented Brake Discs
Authors:
- 6 October 2002
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The paper reports on an experimental investigation of the mean and turbulent flow structure at the exit of vented automotive brake discs. The main goal is to obtain a deeper insight of the aero-thermal phenomena upon which the brake efficiency strongly depends; a second important result is the generation of a comprehensive data set for CFD code validation. Two disc geometries were tested: a backward curved blade and a multiple pin configuration. The experiments were mainly focused on the evaluation of local and global fluid dynamic features, as vented mass flow rate and turbulence characteristics at the disc exit. Results in terms of mean and turbulence velocity component distributions and vented mass flow rate through the brake disc passages allow a comprehensive description of the flow behavior, together with a comparison between the two disc geometries. Once the mean and turbulent flow field at the disc exit was characterized, the effect of the presence of the caliper was investigated on both brake geometries. Effects on the total mass flow rate processed by the disc were evidenced as well as local distortion of the flow. A discussion of the caliper effects on the flow structure inside the channel, based on the measurements at the channel exit, is also reported.Keywords
This publication has 4 references indexed in Scilit:
- 72 Curved Fins and Air Director Idea Increases Airflow through Brake RotorsSAE International Journal of Advances and Current Practices in Mobility, 1999
- A Methodological Process for Optimizing Brake Cooling and Simulation of Brake Rotor Flow FieldSAE International Journal of Advances and Current Practices in Mobility, 1995
- Analysis and Optimization of Disk Brake Cooling via Computational Fluid DynamicsSAE International Journal of Advances and Current Practices in Mobility, 1995
- Approaches to the Thermal Modeling of Disc BrakesSAE International Journal of Advances and Current Practices in Mobility, 1988