Abstract
Lead zirconate titanate (PZT) is a high dielectric constant, /spl epsiv//sub r//sup S/, high coupling, k/sub t//sup 2/, piezoelectric material with possible application to film bulk acoustic resonators (FBAR) at low microwave frequencies. PZT is a widely used material at audio and low MHz range frequencies, but the high acoustic attenuation of PZT tends to preclude its use above UHF. Likewise, the bulk dielectric/piezoelectric/elastic (DPE) properties are well known at low frequencies, but the thin film properties have not been as well measured into the microwave range. To obtain better data, the material properties of thin film PZT deposited by several methods were measured at GHz frequencies from air- or silicon-backed FBARs fabricated on silicon wafers. PZT thin films, deposited by metal-organic chemical vapor deposition (MOCVD), sol-gel deposition, RF sputtering, or jet vapor deposition, were obtained from various sources. The films examined ranged from 0.4 to 2 /spl mu/m in thickness, and were deposited on thin (/spl sim/0.1 /spl mu/m) Pt or Ir bottom electrodes. The samples had compositions within the tetragonal phase (Zr/Ti = 30/70, 40/60) or near the morphotropic phase boundary (Zr/Ti = 50/50). Scattering parameter, S/sub 11/, vs frequency measurements were made. Using the Mason equivalent circuit model, the DPE coefficients were extracted by varying parameters in the Mason model until the predicted S/sub 11/ vs frequency fitted the measured data. The devices exhibited /spl epsiv//sub r//sup S/ in the range of 300 to 500, k/sub t//sup 2/ between 5% and 35%, and acoustic attenuation from 400 to 2100 dB/cm at 1 GHz.

This publication has 10 references indexed in Scilit: