Characterization of metal‐polymer interaction forces by AFM for insert molding applications
Authors:
Open Access
- 23 October 2020
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 60 (12) , 3036-3045
Abstract
There is a growing interest in the overmolding of electronics with thermoplastics and the embedding of electronics in 3D printed parts. However long term device reliability requires good adhesion between the metallic surfaces of the electronic components and the overmolding polymer. In order to provide a guide to material selection, interaction forces between tin, a common electronics metallization and six commodity thermoplastics were studied. The force measurements were undertaken using atomic force microscopy (AFM) with probes functionalized with tin particles. The particles were attached to the probes by a novel method using a focused ion beam (FIB) instrument. Highly consistent cantilever deflections at pull‐off were obtained, allowing the thermoplastics to be robustly ranked by strength of interaction with tin as: PC > PMMA > PBT > ABS > PS > PA 6. From consideration of possible contributions to the pull‐off forces measured, it was concluded the data and the developed AFM tip functionalization technique are likely to be useful in materials selection for electronics overmolding with thermoplastics. The FIB functionalization technique may be useful in the wider context of investigations of other metal‐polymer interaction forces, for example with alloys, where other methods of functionalization may be difficult to apply.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/C534212/1)
This publication has 28 references indexed in Scilit:
- Surface energy approach and AFM verification of the (CF)ntreated surface effect and its correlation with adhesion reduction in microvalvesJournal of Micromechanics and Microengineering, 2009
- Environmentally friendly assembly of robust electronics without solderCircuit World, 2008
- Single-Nanoparticle-Terminated Tips for Scanning Probe MicroscopyLangmuir, 2006
- Force measurements with the atomic force microscope: Technique, interpretation and applicationsSurface Science Reports, 2005
- The use of electrostatic techniques for the identification and sorting of waste packaging materialsResources, Conservation and Recycling, 2005
- Mechanical properties of polymer‐ceramic nanocomposite coatings by depth‐sensing indentationPolymer Engineering & Science, 2005
- A semi-quantitative tribo-electric series for polymeric materials: the influence of chemical structure and propertiesJournal of Electrostatics, 2004
- Gold elliptical nanoantennas as probes for near field optical microscopyJournal of Applied Physics, 2002
- Atomic Force Microscope Techniques for Adhesion MeasurementsThe Journal of Adhesion, 2000
- Force-distance curves by atomic force microscopySurface Science Reports, 1999