Threshold Maps for Inclusion-Initiated Micro-Cracks and White Etching Areas in Bearing Steel: The Role of Impact Loading and Surface Sliding
Open Access
- 30 July 2018
- journal article
- research article
- Published by Springer Nature in Tribology Letters
- Vol. 66 (3) , 1-18
Abstract
Wind turbine gearbox (WTG) bearings can fail prematurely, significantly affecting wind turbine operational availability and the cost of energy production. The current most commonly accepted theory of failure mechanism is that the bearing subsurface is weakened by white etching crack (WEC) networks that eventually lead to the flaking away of material from the bearing surface. Subsurface damage due to rolling contact fatigue (RCF) is thought to be the main cause of premature failure, resulting from the initiation of micro-cracks, often at non-metallic inclusions or other material defects, which then propagate to the bearing surface. This study proposes a hypothesis that impact loading together with high levels of surface traction and contact pressure are important factors contributing to the initiation of micro-cracks and white etching areas (WEAs) at non-metallic inclusions which may lead to the formation of WEC networks. Both repeated impact and twin-disc RCF tests were designed to investigate inclusion-initiated micro-cracks and WEAs at subsurface in order to test this hypothesis. This led to the recreation of inclusion-initiated micro-cracks and WEAs in tested specimens, similar to the subsurface damage observed at inclusions in failed WTG bearing raceways. Tests were carried out to determine threshold levels of contact pressure, surface traction, and impact loading required for the formation of inclusion-initiated micro-cracks and WEAs.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/J 500525/1, EP/K 503149/1, EP/N016483/1)
This publication has 48 references indexed in Scilit:
- Steels for bearingsProgress in Materials Science, 2012
- A fracture mechanics interpretation of rolling bearing fatigueProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2012
- Tribological Aspects of Rolling Bearing Failures2011
- Sub-Surface Initiated Rolling Contact Fatigue—Influence of Non-Metallic Inclusions, Processing History, and Operating ConditionsJournal of ASTM International, 2010
- EBSD investigation of the crack initiation and TEM/FIB analyses of the microstructural changes around the cracks formed under Rolling Contact Fatigue (RCF)International Journal of Fatigue, 2010
- Crystallographic Analyses on Cracks Initiated by Rolling Contact Fatigue in High Carbon Chromium Bearing SteelMaterials Science Forum, 2007
- TEM/SEM investigation of microstructural changes within the white etching area under rolling contact fatigue and 3-D crack reconstruction by focused ion beamScripta Materialia, 2007
- Experimental and numerical study of forces during oblique impactJournal of Sound and Vibration, 1988
- Contact MechanicsJournal of Tribology, 1986
- Principles of LubricationJournal of Lubrication Technology, 1967