Biologically Compatible Lead-Free Piezoelectric Composite for Acoustophoresis Based Particle Manipulation Techniques
Open Access
Abstract
This research paper is concentrated on the design of biologically compatible lead-free piezoelectric composites which may eventually replace traditional lead zirconium titanate (PZT) in micromechanical fluidics, the predominantly used ferroelectric material today. Thus, a lead-free barium–calcium zirconate titanate (BCZT) composite was synthesized, its crystalline structure and size, surface morphology, chemical, and piezoelectric properties were analyzed, together with the investigations done in variation of composite thin film thickness and its effect on the element properties. Four elements with different thicknesses of BCZT layers were fabricated and investigated in order to design a functional acoustophoresis micromechanical fluidic element, based on bulk acoustic generation for particle control technologies. Main methods used in this research were as follows: FTIR and XRD for evaluation of chemical and phase composition; SEM—for surface morphology; wettability measurements were used for surface free energy evaluation; a laser triangular sensing system—for evaluation of piezoelectric properties. XRD results allowed calculating the average crystallite size, which was 65.68 Å3 confirming the formation of BCZT nanoparticles. SEM micrographs results showed that BCZT thin films have some porosities on the surface with grain size ranging from 0.2 to 7.2 µm. Measurements of wettability showed that thin film surfaces are partially wetting and hydrophilic, with high degree of wettability and strong solid/liquid interactions for liquids. The critical surface tension was calculated in the range from 20.05 to 27.20 mN/m. Finally, investigations of piezoelectric properties showed significant results of lead-free piezoelectric composite, i.e., under 5 N force impulse thin films generated from 76 mV up to 782 mV voltages. Moreover, an experimental analysis showed that a designed lead-free BCZT element creates bulk acoustic waves and allows manipulating bio particles in this fluidic system.Keywords
Funding Information
- Lietuvos Mokslo Taryba (S-MIP-19-43)
This publication has 38 references indexed in Scilit:
- Evaluation of the Mechanical Properties of PMMA Reinforced with Carbon Nanotubes - Experiments and ModelingExperimental Mechanics, 2013
- Vibration Measurement by Speckle Interferometry between High Spatial and High Temporal Resolution2011
- Caracterização superficial de nanopartículas de BaTiO3 preparado pelo método dos precursores poliméricosCerâmica, 2010
- Perspective on the Development of Lead‐free PiezoceramicsJournal of the American Ceramic Society, 2009
- Room‐Temperature Synthesis of BaTiO 3 Nanoparticles in Large BatchesJournal of the American Ceramic Society, 2008
- Dielectric properties of Pb(Mg1/3Nb2/3)O3 and (Pb1−xLax)(Mg(1+x)/3Nb(2−x)/3)O3 ceramics prepared by columbite routeJournal of the European Ceramic Society, 2007
- Synthesis and Characterization of Aryl Ethynyl Terminated Liquid Crystalline Oligomers and Their Cured PolymersMacromolecules, 2006
- Lead-free piezoceramicsNature, 2004
- Separation of lipids from blood utilizing ultrasonic standing waves in microfluidic channelsThe Analyst, 2004
- Characterization of Barium Titanate Powders: Barium Carbonate IdentificationJournal of the American Ceramic Society, 1999