Numerical simulation of punching shear failure in recycled aggregate concrete slabs with steel fiber reinforcement
Open Access
- 1 January 2023
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 16 (3) , e16310
Abstract
The use of construction waste as aggregate in the production of concrete is becoming a more frequent alternative due to the advantages associated with the sustainability aspect. Results obtained in experimental tests with recycled aggregate concrete suggest that mechanical properties such as elastic modulus, compressive, tensile and flexural strength tend to reduce with partial or total replacement of natural aggregate by recycled one. On the other hand, the use of steel fiber reinforcement can minimize the reduction of these properties, since the fibers tend to improve the material strength and ductility. This work proposes a numerical approach, seeking to better predict and understand the structural mechanical behaviors and failure patterns of reinforced recycled aggregate concrete slabs with and without steel fiber. Based on the finite element method, an appropriated constitutive damage model is employed to represent the nonlinear behavior of the conventional/recycled concrete, while an elastic-perfectly plastic model is used to describe the mechanical behavior of the reinforcements. To couple the independent FE meshes and incorporate the mutual interaction between the different components, rigid and non-rigid coupling technique is used to represent the perfect adherence or the bond-slip behavior. Seven concrete slabs were numerically analyzed either with different percentages of recycled aggregate replacement (0, 50 and 100%) or steel fibers content (0.0, 0.5 and 1.0%) and the results were compared with the experimental ones. The results showed that the applied methodology is capable of simulating with good accuracy the punching shear failure mechanism of the slabs. It was observed that the punching ultimate load decreased with increase of recycled aggregate content, as well as that the steel fiber addition can minimize the negative effects of recycled aggregate employment.Keywords
This publication has 23 references indexed in Scilit:
- An adaptive concurrent multiscale model for concrete based on coupling finite elementsComputer Methods in Applied Mechanics and Engineering, 2018
- Numerical Simulation of Recycled Concrete Using Convex Aggregate Model and Base Force Element MethodAdvances in Materials Science and Engineering, 2016
- 2D mesoscale model for concrete based on the use of interface element with a high aspect ratioInternational Journal of Solids and Structures, 2016
- A coupling technique for non-matching finite element meshesComputer Methods in Applied Mechanics and Engineering, 2015
- A modified implicit–explicit integration scheme: an application to elastoplasticity problemsJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2015
- Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concreteCement and Concrete Composites, 2014
- Recycled Concrete as Aggregate for Structural Concrete ProductionSustainability, 2010
- Mechanical properties modeling of recycled aggregate concreteConstruction and Building Materials, 2010
- Failure mechanism of recycled aggregate concreteConstruction and Building Materials, 2008
- An implicit/explicit integration scheme to increase computability of non-linear material and contact/friction problemsComputer Methods in Applied Mechanics and Engineering, 2008