A Method to Design an Efficient Airfoil for Small Wind Turbines in Low Wind Speed Conditions Using XFLR5 and CFD Simulations
Open Access
Abstract
Small wind turbines operating in low wind speed regions have not had any significant success. In addition, small wind speed regions occupy a large area of the world, so they represent a potential area for installing small wind turbines in the future. In this paper, a method to design an efficient airfoil for small wind turbines in low wind speed conditions using XFLR5 and CFD simulations is implemented. Because the impact of the airflow on the blade surface under low Re number conditions can change suddenly for small geometries, designing the airfoil shape to optimize the aerodynamic performance is essential. The tuning of the key geometric parameters using inversion techniques for better aerodynamic performance is presented in this study. A two-dimensional model was used to consider the airflow on the airfoil surface with differences in the angle of attack. The original S1010 airfoil was used to design a new airfoil for increasing the aerodynamic efficiency by using V6.57 XFLR5 software. Subsequently, the new VAST-EPU-S1010 airfoil model was adjusted to the maximum thickness and the maximum thickness position. It was simulated in low wind speed conditions of 4–6 m/s by a computational fluid dynamics simulation. The lift coefficient, drag coefficient, and CL/CD coefficient ratio were evaluated under the effect of the angle of attack and the maximum thickness by using the k-ε model. The simulation results show that the VAST-EPU-S1010 airfoil achieved the greatest aerodynamic efficiency at an angle of attack of 3°, a maximum thickness of 8%, and a maximum thickness position of 20.32%. The maximum value of CL/CD of the new airfoil at 6 m/s was higher than at 4 m/s by about 6.25%.Keywords
Funding Information
- Vietnam Academy of Science and Technology (VAST) (VAST07.01/22-23)
This publication has 27 references indexed in Scilit:
- Control of flow separation around an airfoil at low Reynolds numbers using periodic surface morphingJournal of Fluids and Structures, 2018
- Proposal for a coupled aerodynamic–structural wind turbine blade optimizationComposite Structures, 2017
- Applying micro scales of horizontal axis wind turbines for operation in low wind speed regionsEnergy Conversion and Management, 2014
- Blade design and performance testing of a small wind turbine rotor for low wind speed applicationsRenewable Energy, 2013
- Blade layers optimization of wind turbines using FAST and improved PSO AlgorithmRenewable Energy, 2012
- Design of a new urban wind turbine airfoil using a pressure-load inverse methodRenewable Energy, 2009
- Shape optimization of wind turbine bladesWind Energy, 2009
- Experimental study of a small wind turbine for low- and medium-wind regimesInternational Journal of Energy Research, 2009
- Exergy and reliability analysis of wind turbine systems: A case studyRenewable and Sustainable Energy Reviews, 2007
- The starting and low wind speed behaviour of a small horizontal axis wind turbineJournal of Wind Engineering and Industrial Aerodynamics, 2004