Numerical Modeling and Parametric Optimization of Micromixer for Low Diffusivity Fluids
- 12 May 2017
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 16 (3)
Abstract
This paper deals with the design, analysis and optimization of micro-mixer for fluids having very low diffusivity (in the order of 10 −12 m 2 /s) to be used in Lab on Chip (LOC) for medical diagnosis. As flow is laminar and the cross-sectional area is in microscale, the viscous forces are strong causing the fluids to be transported in streamline with minimum diffusion. The main objective in designing a micro mixer is to achieve complete mixing with minimum channel length and pressure drop. In this work a passive micro mixer with two inlets and one outlet (Y shaped passive micro mixer) with obstacles in various shapes and sizes is modelled, to study the effect of mixing. After a CFD analysis, Analysis of variance (ANOVA) of 3 K design with 3 parameters as well as a 2 K design with 4 parameters was performed to study the effect of parameters on mixing index (mixing length) and pressure loss. There is a negative correlation between the response obtained for mixing length and pressure loss while varying the parameters. This makes it difficult to predict the optimum configuration. Taguchi method is used to obtain an optimum configuration to overcome this negative correlatiozn.Keywords
This publication has 18 references indexed in Scilit:
- Analytical, numerical and experimental investigations of mixing fluids in microchannelMicrosystem Technologies, 2012
- Robust design of an active micro-mixer based on the Taguchi methodSensors and Actuators B: Chemical, 2008
- A passive planar micromixer with obstructions for mixing at low Reynolds numbersJournal of Micromechanics and Microengineering, 2007
- Numerical and experimental study on a channel mixer with a periodic array of cross bafflesJournal of Mechanical Science and Technology, 2007
- Mixing enhancement of the passive microfluidic mixer with J-shaped baffles in the tee channelBiomedical Microdevices, 2006
- Micromixers—a review on passive and active mixing principlesChemical Engineering Science, 2005
- A barrier embedded Kenics micromixerJournal of Micromechanics and Microengineering, 2004
- Design and simulation of the micromixer with chaotic advection in twisted microchannelsLab on a Chip, 2003
- Mixing characteristics of T-type microfluidic mixersJournal of Micromechanics and Microengineering, 2001
- A Novel In-Plane Passive Micromixer Using Coanda Effect2001