Study on anisotropic heat transfer and thermal damage in nanosecond pulsed laser processing of CFRP
- 5 July 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (9) , 5964-5983
Abstract
Nanosecond pulsed laser processing is an efficient method of processing carbon fiber reinforced plastic(CFRP), which is widely used in the manufacturing field of aviation, medical, and auto industries. The anisotropic heat transfer of carbon fiber is a key factor degrading the surface integrity of laser processing CFRP. So it is urgent to explore the significant mechanism of anisotropic heat transfer of laser interacting with CFRP. A novel numerical model considering anisotropic heat transfer was established to analyze heat transfer and thermal damage of CFRP laser machining. By comparison of simulation and experiments, the average error of ablation depth and width ranges from 4.71% to 15.09%, so the model could precisely simulate the CFRP laser machining. It demonstrates that the heat conductivity along the axial carbon fiber is higher than that along the radial, resulting in an elliptical ablation morphology. And when the laser scanning direction is parallel to the direction of the carbon fiber, deeper and narrower microgrooves can be obtained. In addition, laser processing at the edge of the CFRP plate causes serious heat accumulation, leading to severe thermal damage. The simulation and experiments were conducted to explore the effect of parameters including laser energy, scanning speed, and scanning space on the depth and width of laser ablation. A deeper micro‐channel with a smooth machined surface and small thermal damage was obtained when laser energy E = 0.275 mJ, scanning speed v = 630 mm/s, and scanning space h = 21 μm.Keywords
Funding Information
- Guangdong Basic and Applied Basic Research Foundation (2022A1515140083)
- National Natural Science Foundation of China (51975228)
This publication has 40 references indexed in Scilit:
- Three-dimensional numerical simulation during laser processing of CFRPApplied Surface Science, 2017
- Modeling of the material removal and heat affected zone formation in CFRP short pulsed laser processingApplied Mathematical Modelling, 2017
- Numerical simulation and experimental research on reduction of taper and HAZ during laser drilling using moving focal pointThe International Journal of Advanced Manufacturing Technology, 2016
- Influence of electrical discharge machining parameters on cutting parameters of carbon fiber-reinforced plasticMachining Science and Technology, 2016
- Momentum and velocity of the ablated material in laser machining of carbon fiber preformsApplied Physics A, 2013
- An experimental device for the simultaneous estimation of the thermal conductivity 3-D tensor and the specific heat of orthotropic composite materialsInternational Journal of Heat and Mass Transfer, 2010
- Study on UV laser machining quality of carbon fibre reinforced compositesComposites Part A: Applied Science and Manufacturing, 2010
- Numerical simulation of laser machining of carbon-fibre-reinforced compositesProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010
- Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRPInternational Journal of Machine Tools and Manufacture, 2008
- The anisotropic heat-affected zone in the laser grooving of fiber-reinforced composite materialJournal of Materials Processing Technology, 1996