Stable Binder Boosting Sulfide Solid Electrolyte Thin Membrane for All-Solid-State Lithium Batteries

Authors:

Abstract
Current inorganic solid electrolyte membranes generally suffer thick thickness of hundreds micrometers as well as low ionic conductivity, which limits the energy density and cycle life of all-solid-state lithium batteries. In this work, wet coating is employed to fabricate the Li 6 PS 5 Cl solid electrolyte thin membrane. The interaction among solvents containing different functional groups with the Li 6 PS 5 Cl electrolyte was explored. A new polymeric binder is synthesized by polymerization of dimethyl aminoethyl methacrylate (DMAEMA), polyethylene glycol diacrylate (PEGDA), and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), showing excellent stability to Li 6 PS 5 Cl solid electrolyte particles and high tensile strength of 1.46 MPa. Thus, a 40-μm-thick freestanding Li 6 PS 5 Cl membrane with 90 wt% Li 6 PS 5 Cl content is realized through in situ photo-polymerization, possessing a relatively high room temperature ionic conductivity of 1.23 mS cm −1 . Moreover, the all-solid-state battery-based Li 6 PS 5 Cl membrane exhibits superior cycling stability after 1,000 cycles with a capacity retention of 76.92% at 0.2 C under 60 °C. When the mass load of the active material LiCoO 2 increases to 15.2 mg cm −2 , the all-solid-state cell still delivers a high initial discharge capacity of 123.0 mAh g −1 (1.87 mAh cm −2 ) with a capacity retention rate of 89.93% after 200 cycles.
Funding Information
  • National Key R&D Program of China (2022YFB3807700)
  • Science and Technology Innovation 2025 Major Project of Ningbo Municipality (2021Z122, 2023Z106)
  • National Natural Science Foundation of China (22309194, 52372244)
  • Zhejiang Provincial Key R&D Program of China (2022C01072)
  • Jiangsu Provincial S&T Innovation Special Programme for carbon peak and carbon neutrality (BE2022007)
  • Youth Innovation Promotion Association CAS (Y2021080)

This publication has 32 references indexed in Scilit: